Freitag, 6. Mai 2022

Traverse Brioche Scarf

Two-colour brioche is a marvellous technique. It creates a lovely, squishy texture that is comforable to wear and it can be used to create quite intricate geometric patterns. 

This rectangular scarf is knitted with a criss-cross pattern, i.e. a stitch that combines increases and decreases, combined with a zigzag effect that is created by switching the dominant colour within the row. Since it is done in two-colour brioche, both sides look great.

This scarf is made with Lace weight yarn, which provides a light summery touch. The one I knitted (half alpace, half merino) only weighs 170 grams; it measures 150 cm in length and 45 cm in width.


The pattern PDF is available via


The pattern PDF is 9 pages long and contains

  • row-by-row pattern instructions
  • photo tutorials for the techniques you need for this piece:
    • brk4inc
    • brk4dec 
    • brk4dec4inc
  • a schematic / cheat-sheet that explains the increases and decreases for this pattern
In order to knit this pattern you should be familiar with basic two-colour brioche knitting.


To knit a scarf like this you need the following materials

  • a total of about 1100 metres of lace weight yarn – in two colours,
    I used two (semi-)solid yarns: 
    • as LY I used light green Holst Garn, Titicaca (colorway “Wasabi”) 
    • as DY I used royal blue Wollmeise Lace (colorway “Kornblume”) 
  • 3 mm knitting needles – circulars or other needles with two points
  • 2 stitch markers 
  • a cable needle or a clippy stitch marker – for some of the brk4dec4inc and brk4dec stitches
  • tapestry needle for weaving in ends


Donnerstag, 21. April 2022

Pieces of Eight Mitts in Dutch - Gratis Breipatroon

Carolien (or mijikke on Ravelry) has provided a Dutch translation of the Pieces of Eight Mitts. Hartelijk bedankt!

The Dutch translation can be found here.

The original English version is available here - as well as links to German and Danish translations.



A list of all translations of my patterns can be found in this blogpost.

Samstag, 16. April 2022

Mauerblümchen

Here's another pattern for fingerless gloves - again knitted flat and in garter stitch. 

These fingerless gloves are knitted flat and in garter stitch. They are shaped with short rows around a point at the outer wrist, the thumb is created one half at a time (with a short knitted CO and a BO). The flower pattern is done in intarsia technique. The project starts with a provisional cast on and finishes with grafting in garter stitch. In the end the side seams are sewn up.

Since this is an intarsia project with three colours that also uses short rows, it can be quite fiddly.  It is NOT a beginner pattern.

As to the name, "Mauerblümchen" is the German word for wall flower - it ties in with my Blümchen Fingerless Gloves that have a flower motive around the thumb.

The knitting pattern in available via




The pattern PDF is 13 pages long and contains 

  • written row-by-row instructions for knitting a mitt in one size (slight adjustments can be made by using a different needle size) – including nine in-process photos  
  • a pattern chart
  • short photo tutorials for the following techniques
    • provisional CO with a crochet hook and how to undo it
    • grafting in garter stitch
    • short rows with wrap and turn and picking up the wraps 
    • intarsia knitting and weaving in yarn while carrying it (backwards and forwards)
    • knitted CO 



Gauge and Size
I knitted two pairs – one with 2.5 mm needles and one with 3 mm needles – see photo below.
With 2.5 mm needles 28 ridges (56 garter stitch rows) gave me 10 cm in height and 25 sts gave 10 cm in width (with an unblocked swatch, since I didn't block the mitts). The finished piece knitted with 2.5 mm needles is about 17 - 18 cm high (at it's highest point) and about 17 cm in diameter (without just below the thumb). 
With 3 mm needles 26 ridges (53 garter stitch rows) gave me 10 cm in height and 23 sts gave 10 cm in width (also with  unblocked swatch). The finished piece measures about 19 - 20 cm in height and about 19 cm in diameter (just below the thumb).
However, the pieces are all in garter stitch, so they are quite stretchy.


To knit a pair of these fingerless gloves you need the following materials:
  • a total of 30 to 35 grams of fingering weight yarn in two colors:
    • about 12 grams per mitt for C1 (background color)
    • about 4 grams per mitt for C2 (flower color)
  • 2.5 mm or 3 mm knitting needles (or another needle that gives you the gauge) – straight or circulars
  • scrap yarn and a crochet hook (about 3mm) for the provisional CO
  • a tapestry needles for grafting, sewing and to weave in ends


Donnerstag, 10. März 2022

Ripple Fingerless Gloves

Fingerless gloves are my favorite accessory – there are so many varieties and ways to construct them.

The ones here are knitted flat and in garter stitch with a wave pattern. One edge of the flat row is the thumb around which the mitt shaped in short rows. It starts with a provisional cast on and ends with a row of grafting in garter stitch. The wavy patternis created with increases and decreases.

This is NOT a beginner pattern.


The knitting pattern is available via



The pattern PDF is 12 pages long contains 

  • written row-by-row instructions for knitting a mitt in one size (slight adjustments can be made by using a different needle size)– including six photos of the different stages  
  • a full pattern chart
  • short photo tutorials for the following techniques:
    • provisional CO with a crochet hook and how to undo it
    • grafting in garter stitch
    • short rows with wrap and turn and picking up the wraps 


Gauge and Size

I knitted pairs in two needle sizes – with 2.5 mm needles and with 3 mm needles – see photo below:
  • With 2.5 mm needles 28 ridges (56 garter stitch rows) gave me 10 cm in height and 25 sts gave 10 cm in width (with an unblocked swatch, since I didn't block the mitts). The finished piece knitted with 2.5 mm needles is about 19 cm high (at it's highest point) and about 17 cm in diameter (without just below the thumb). 
  • With 3 mm needles 26 ridges (53 garter stitch rows) gave me 10 cm in height and 23 sts gave 10 cm in width (also with  unblocked swatch). The finished piece measures about 20 cm in height and about 19 cm in diameter (just below the thumb).

To knit a pair of these fingerless gloves you need:
  • a total of about 35 to 40 grams of fingering weight yarn - I used 
  • 2.5 mm or 3 mm knitting needles (or another needle that gives you the gauge) – straight or circulars
  • scrap yarn and a crochet hook (about 3mm) for the provisional CO
  • 10 stitch markers – 4 of which removable  
  • a tapestry needles for grafting and to weave in ends
One mitt finished - one mitt needs to be sewn up


Freitag, 26. November 2021

Starry Christmas Decorations - Knitted

The first sunday of advent is coming up, which is the time to decorate your space as christmassy as possible. And for me stars - knitted and otherwise - are the best way to do so. 

So here are two seasonal patterns that help to bring a starry sparkle to your home.

Stella Star-Shaped Potholders

These potholders (doilies, coasters) are knitted flat and in garter stitch. This pattern was published two years ago. Lately, I have completely reviewed it and added two more variations. 

The new pattern PDF 14 pages long and contains:

  • the complete written patterns for stars in two sizes including charts
  • a general pattern how to knit stars in other sizes – containing also a photo tutorial
  • three further variations of this pattern (see photos below)
    • a lacy variation of this star – written pattern and a chart
    • a pattern for a two-colour variation – written pattern, a chart and detailed instructions how to undo the provisional CO in two colours and how to do the grafting in two colours
    • a three-colour variation – chart only 
  • short photo tutorials for the following techniques
    • provisional cast on with a crochet hook and how to undo it
    • grafting in garter stitch
    • intarsia

You can buy this pattern




Sternchen 3D-Stars

Even though these stars are 3-dimensional they are knitted flat. They have six points, are constructed of short rows and knitted (nearly) all in garter stitch. They come in four sizes and can be used to decorate your house for Christmas.

The pattern PDF contains

  • a written pattern for four sizes of these little stars (ranging from 6 to 14 cm in diameter - if knitted in fingering weight yarn)
  • a chart for two sizes
  • photo illustrations for various stages of star

The pattern is available as a PDF







Samstag, 13. November 2021

U-Turn Hat in 6-Ply Yarn

About four years ago, I published a hat pattern that was based on the idea of a magic cast-on and knitting around it in a U-shape (U-Turn Hat) - as with many of my knitted accessories, it is knitted in fingering weight. Motivated by an online discussion with Angela from bestrickendes.de, I thought it might be a good idea to knit it in a thicker yarn. So the next time I went into a yarn store, I looked for some self-striping 6- or 8-ply yarn. I bought some Zwerger Opal Sweet Dreams (Colorway 9720 Sternentänzer, here's a link to the yarn's Ravelry page).

In this blogpost, I'll explain how I "adapted" the pattern to 6-ply yarn. 

If you like that kind of construction, I have used a similar idea before for fingerless gloves (U-Turn Mitts) and slipppers (U-Turn Slippers).






Step 1: Check the general construction

The hat is knitted flat an in a U-shape around the first magic CO. Each row consists of a garter stitch part (ribbing - at the beginning and end of each row) and a semicircular bit around the turning point of the U. The slope is achieved by changing the number of increases and decreases. See schematic below.

Construction - click to enlarge

First there are 4 decreases every 2nd row (section A), which basically creates a semicircle above the ribbing. Then only 3 increases (section B), then only 2 (section C), then only 1 (section D) and finally there will be a few rows without any increases at all (section E).

Once you've reached the middle of your piece, you will knit the same backwards, i.e. there will be decreases instead of increases. That means you start with no decreases (section F), then switch to 1 decrease every 2nd row (section G), then 2 decreases every 2nd row (section H), then 3 (section I) and finally 4 decreases every 2nd row (section J). Until there are only as many stitches left as in the original CO. The piece is finished with a three-needle BO.

To get the slope to fit around a standard head the pattern suggests that of the total number of rows necessary reach the middle of the piece should be divided as follows:

  • about 1/3 for RS rows with 4 in/decreases
  • about the same number for RS rows with 3 in/decreses
  • about 1/6 for RS rows with 2 in/decreases
  • divide the remaining rows equally into rows 1 in/decrease and no in/decrease. 

Step 2: Knit a swatch 

Yes, really. Even though I don't like swatching I knitted a small piece to find out how many rows I needed for the hat to fit around my head and how many stitches I needed to get my desired height of garter stitch ribbing.


Step 3: Calculate and distribute the rows

I decided that I wanted a ribbing about 6 cm high (13 stitches as per my swatch). For a quarter of the circumference of my head I calculated that I would need 27 ridges or 54 rows. 

I then divided the 27 ridges into the sections as follows:

  • section A /J: 9 ridges
  • section B/I: 8 ridges
  • section C/H: 5 ridges
  • section D/G: 3 ridges
  • section E/F: 2 ridges
  • => total number of ridges 27
As you can see, the distribution of the sections is not as exact as suggested by the pattern. But since the resulting fabric (knitting) is quite stretchy, that doesn't matter.


Step 4: Knit 

And while you're knitting, check and measure from time to time, if your calculations are correct and - if necessary - adapt.



Freitag, 5. November 2021

Blümchen Fingerless Gloves

I love fingerless gloves. They are my favorite accessory – and also my favorite piece to knit because they offer so many varieties of constructing them. These are knitted flat and in garter stitch. One edge of the row is the thumb and the mitt shaped around it in short rows. The flower pattern is done in intarsia technique. The piece starts with a provisional CO and is finished by grafting in garter stitch. After grafting the side seams are sewn up.

Since this is an intarsia project with three colours that also uses short rows, it can be quite fiddly. It is NOT a beginner pattern.




The pattern is available via 



The pattern PDF is 15 pages long and contains

  • written row-by-row instructions for knitting a glove in one size (see below) – including eight photos of the different stages
  • pattern chart
  • short photo tutorials for the following techniques
    • provisional CO with a crochet hook and how to undo it
    • grafting in garter stitch
    • short rows with wrap and turn and picking up the wraps 
    • intarsia knitting 
    • weaving in yarn while carrying it (backwards and forwards)
  • step-by-step explanations with photos of
    • undoing the provisional CO in this pattern (i.e. catching stitches in different colours)
    • grafting with colour changes


Gauge and Size(s)
I knitted two pairs – one with 2.5 mm needles and one with 3 mm needles:
  • With 2.5 mm needles 28 ridges (56 garter stitch rows) gave me 10 cm in height and 25 sts gave 10 cm in width (with an unblocked swatch, since I didn't block the mitts). The finished piece knitted with 2.5 mm needles is about 18 cm high (at it's highest point) and about 16 cm in diameter (without just below the thumb). 
  • With 3 mm needles 26 ridges (53 garter stitch rows) gave me 10 cm in height and 23 sts gave 10 cm in width (also with  unblocked swatch). The finished piece measures about 20 cm in height and about 18 cm in diameter (just below the thumb).
However, the pieces are all in garter stitch, so they are quite stretchy.
The picture below shows a comparison of the two "sizes".



To knit a pair of these fingerless gloves you need the following materials
  • Fingering weight yarn in three colors – I used a total about 35 to 40 grams (or 150 to 170 metres):
    • about 20 grams of C1 (green in the title picture)
    • about 14 grams of C2 (white in the title picture)
    • about 4 grams of C3 (pink in the title picture)
  • 2.5 mm or 3 mm knitting needles – straight or circulars (or another needle that gives you the gauge) 
  • scrap yarn and a crochet hook (about 3mm) for the provisional CO
  • 2 removable stitch markers 
  • two tapestry needles for grafting and to weave in ends
Just before finishing the 2nd mitt :)