U-Turn Slippers

I'm back to knitting slippers again. As usual, I tend to prefer constructions that are a bit out of the ordinary (such as the Undecided Slippers I published last year).
These slippers are knitted in a U-Turn shape around the tip of your foot. They are constructed in one piece, i.e. there are only two ends to weave in per slipper. The pattern comes out best when using variegated yarn, e.g. colorful sock yarn.

This work by Knitting and so on is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Materials

• 3.25mm circular needles (even though everything is knitted back and forth)
• about 40 grams of fingering weight yarn
• a third needle for the three-needle-BO
• tapestry needle  to weave in ends
• 3 stitch markers 
• a safety pin to secure your stitch while turning the piece right sides out

Techniques & Notation

• Judy's Magic Cast-On is a technique that gives you live stitches on both sides of your needle - it is generally used for toe-up socks (e.g. in this pattern), but it can be used for other purposes as well. Here's a written description (from Knitty) and here's a YouTube-video by Cat Bordhi and another YouTube-video by Very Pink Knits.
• Picking up stitches from the side: Without your working yarn, insert the needle into the front leg of the edge stitch from back to front. A photo how this looks like, is shown in a post regarding the short wave mitts. Here’s a Knitty-article that explains picking up stitches in detail (also the difference between "picking up" and "picking up and knit"): http://www.knitty.com/ISSUEwinter04/FEATwin04TT.html
• Three-Needle Bind-Off: https://youtu.be/Ph93jWSzTa0
• Knitting a flat circle - or in case of this pattern a semicircle: The technique for knitting a flat circle has been described a few times on this blog, e.g. in the "Zoom Out Mitts"-Post. Basically it consists of doing 8 increases (evenly spaced out in one round) every other row, and varying the starting point for the first increase to avoid an octagon pattern. 
  In this pattern only a semicircle is knitted. This means that there will be only 4 increases on every RS row - and they will be started at a random stitch within the first quarter of the half circle.
  In this pattern you will be asked to increase (or decrease) by 2 from one point in your knitting to another. This means that you can randomly distribute the increases (or decreases) between the two given points (stitch markers)
  As an increase I used kfb and as decrease I used ssk, but you can use other stitches as well, e.g. a make 1 knit stitch (mk1) as increasing stitch or a k2tog as a decrease stitch.

Gauge and What You Need to Measure

• I had a gauge of about 5 sts to 2 cm in width and 5 garter stitch ridges (10 rows) to 2 cm.  With this gauge and with a CO of 2x18 sts, the cast on of the tip will be 8 cm long, The tip will grow by 1/4 of the circumference you measured. You can adjust the length of this part by casting on more or fewer stitches.
• The pattern is written in a way that you can adapt it to the width and length of your feet. As an example I will give the numbers I had for my feet (in purple).
• Before you start, measure around the widest point of your feet (i.e. the circumference) and the length of your feet.

Construction

The slippers is constructed in two parts - the tip and the heel. Both are knitted flat.
It is started at the sole of the tip by doing a magic cast on. Then you knit around that CO in a U-shape making semicircle increases at the tip until the straight egde is half as wide as the circumference of your feet. Then you basically knit the same rows you just knitted backwards, i.e. doing semicircle decreases until the two sides meet and join them with a three-needle bind-off.
To start the heel part, stitches are picked up and knit from the straight edge of the tip part. Then you knit back and forth until you start decreases for a round heel. After some decreases, you only work one side part until the two sides meet. Another three-needle BO closes the heel.
The picture on the right shows a slipper as seen from both the top and the side.


Instructions

Tip
CO 2x18 stitches with the magic CO (i.e. there are 18 stitches on each needle)

Now turn your needles around in a way that you're looking at the garter stitch bumps.
All rows of the tip will be knitted in a U-shape, i.e. you knit the stitches on the first needle turn the piece upside down (this point will be called turning-point ("TP") and knit the stitches on the other needle. Then you turn your knitting to the WS and knit back.

Row 1 (WS): k16, pm, k2, TP, k2, pm, k16
Row 2 (RS): sl1, k to m, increase by 2 sts between m and TP, TP, increase by 2 sts between TP and m, k to end
Row 3 (WS): sl1, k all
Repeat rows 2 and 3 until the straight edge is wide enough to fit half way around your feet. Your piece should look similar to the one depicted in photo 1.
Repeat row 3 once more.

(For the slippers in the pictures, I did a total of 9 increase rows.)

Now you basically knit the same backwards, i.e. for each increase row you knitted before, you will now knit a decrease row. Spelled out this means:
Row 5 (WS): sl1, k all
Row 6 (RS): sl1, k to m, decrease by 2 sts between m and TP, TP, decrease by 2 sts between TP and m, k to end
Repeat rows 5 and 6 until there are only 2 sts left between each marker and the TP.
Row 7: sl1, k to TP

Do a three needle BO, keep the last stitch and turn the tip rights sides out, i.e. that the rigde from the three needle BO is on the inside (see photo 2).

Heel

Starting from only leftover stitch, pick up and knit stitches along the rim of the tip - one stitch per garter stitch ridge (see photo 4).

Count the stitches and devide the number by 4 (this number will be called X). In row 1, you will place two markers, one X stitches away from the beginning of the row and another X stitches away from the end of the row. The piece should look similar to the one in photo 4.  (I had a total of 43 stitch, 1 leftover, 42 picked up. so I distributed them as follows: 11-21-11 where the 21 stitches made up the sole and both 11 stitches the sides).

Row 1 (inside) : sl1, k X-1 sts, place marker, p to last X sts, place marker, k to end

Row 2 (outside): sl1, kfb, k to last 2 sts bef end, kfb, k1

Row 3 (inside): sl1, k to marker, p to marker, k to end

Repeat rows 2 and 3 three times more.

Row 4 (outside) = sl1, k to end

Row 5 (inside) = Row 3

Then repeat rows 4 and 5 until the length of the slippers are  4 cm short of the total length of your feet.

Now start with the heel decreases:

Row 6 (outside): sl1, k to marker, ssk, k to 2 sts before marker, k2tog, k to end

Row 7 (inside): sl1, k to marker, p to marker, k to end

Repeat rows 6 and 7 four more times.

From now on only one of the side parts (in garter stitch) is worked, the stitches between the markers will be decreased row-by-row and the second garter stitch bit will not be worked until it is joined with the opposite side at the end.

Row 8: sl1, k to 1 bef marker, ssk, replace marker, turn, sl1, k to end

Repeat row 8 until there are only 2 stitches between the two markers.

Then knit the following last ridge: sl1, k to 1 bef marker, remove marker, and do a central double decrease as follow: ssk, slip the last stitch back onto the lefthand needle and slip the next stitch over the former ssk. Leave this stitch on the lefthand needle. Then turn, and k to end.

Distribute the remaining stitches evenly on two needles. Your piece should now look similar to photo 5. Finish with a three-needle bind off on the inside of the slipper (see photo 6).

Turn the heel back right sides out.

Weave in ends.
Make two.

This post was features at Oombawkadesign's 194th Wednesday Link & Share Link Party. Thank you!

Candy Corners

Add a sparkle of color to your spring outfit with this light and playful scarf. It is easy to knit because it consists of garter stitch short rows alternated with a lace pattern. As with nearly all short row patterns, it's great to show off your variegated yarn.

This pattern is available for purchase 

• on Ravelry 
• on Loveknitting 
• on Payhip
• on Gumroad

The pattern PDF is 5 pages long and contains written instructions and some illustrations explaining the short rows.





Skills Needed
Besides the plain knit stitch (garter stitch) you need the following skills to knit this scarf:

• Short rows with wrap and turn (w+t)
• Decrease with slip-slip-knit (ssk), alternatively you can use a k2tog
• Increase with yarn-over (yo)

Materials

• 300 grams of DK weight yarn - the yarn I used for the scarf in the pictures is Austermann Step 6 Irish Rainbow Colors (link to the yarn's Ravelry page)
• 4mm needles (straight or circulars)
• 1 stitch marker
• tapestry needle to weave in ends

Gauge and Size
Unblocked my gauge was as follows: 10 sts and 21 rows gave 5 cm. Unblocked the scarf measured 140 cm x 33 cm, blocked it grew to 170 cm x 36 cm

This pattern was featured at Oombawka Design's 188th Link and Share Wednesday Link Party and at the Crafty Love Link Party #21 at the Undergroud Crafter. Thank you!

Another Intarsia Experiment

After my last two intarsia knitting projects (Ice Maiden Cowl and Amplitude Cowl) I decided that it would be funny to take it up a notch, i.e. incorporating other design elements as well. And I decided to add some holes to the mix.

Here's what I came up with: A three-color design with a middle line that winds around small crescent shaped holes. I really like the effect around the middle line, but not the overall piece (yarn type, overall shape etc.). Therefore, the piece in the picture will be frogged, but the basic idea (i.e. wiggly line in the middle with the small holes) will be used in another project.

Mesuneko Hat - A Swatchless Take on the PussyHat Theme

A friend asked me to knit a PussyHat for her (see PussyHat project page for more information). And since I'm not the kind of person to follow a pattern, I started doing it my way. In any case, I like to knit with yarn that's not so bulky (fingering weight for preference) and I only found one pattern for a PussyHat in fingering weight. Plus, I prefer patterns where you can start knitting without any measuring and swatching. And that's just what I did. I started knitting the ribbing sideways and held it around my head to see whether it was long enough. That's why the hat is knitted in two directions: first the ribbing is knitted sideways and flat - then, the main part is knitted bottom-up and in the round.

In the end, I knitted one hat in Fingering and one in DK weight. The first hat was in Fingering weight and knitted on slightly too big needles (i.e. the ones I usually use to get a nice and light texture) - so the fabric wasn't stiff enough to make the "ears" stick out. So tinked the last rows and did the three-needle BO from the outside. The crisp upper edge made the ears stick out better. Furthermore, I knitted a second one with DK weight yarn and needles that were slightly smaller than what the yarn called for - and that worked quite well to get the PussyHat look.

Yes, I know, it's rather late in the day to publish a PussyHat pattern ... but anyway, here's my take at the PussyHat theme.

Mesuneko (メス猫) is the japanese word for a female cat.

This work by Knitting and so on is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Materials

• about 80 grams of DK weight yarn - however, the pattern is written in a way that it can easily adapted to other yarn weights
• 3.25mm needles (straight or circular)
• 3.75mm needles (circulars or dpns)
• a third needle for Three-Needle Bind-Off
• a tapestry needle to weave in ends

Techniques

• Provisional Cast-On: This method of cast-on usually uses some waste yarn that can be remove later to get live stitches, these stitches can either be used to continue knitting in the opposite direction or to graft these stitches to the rest of your piece. My favourite method is the one using a crochet hook (http://www.youtube.com/watch?v=UeExgbgTOgs). The first time you use your working yarn, will be called setup row in this pattern.
• Three-Needle Bind Off: The three needle bind-off is used to attach two pieces of knitting (or to ends of one piece of knitting) to one another - this technique is shown in this YouTube Video - alternatively you can close the upper edge with Stockinette Grafting (Kitchener Stitch). Here’s a video from knittinghelp.com that shows the technique.
• Picking up stitches from the side and knitting them (pick up and knit): https://youtu.be/4XtGL8vJf-g or https://youtu.be/htAHtNnuE7Q or https://youtu.be/oUPhLYkC0Fw 

Instructions

Ribbing
Provisionally CO 20 sts (if you use heavier yarn (e.g. bulky), I'd advise to cast on less stitches for the ribbing).
Setup Row: k all
Row 1: sl1 wyif (p-wise), k to end
Row 2: sl1 wyif (p-wise), p to end
Row 3: sl1 wyib (k-wise), p to end
Row 4: sl1 wyib (k-wise), k to end
Repeat rows 1 to 4 until the brim fits around your head when stretched - end with a row 3.
Put stitches from provisional CO on another needle. Hold ends together and do a three needle BO. Do not bind off the last stitch.

Main Part
Starting from the leftover stitch pick up and knit stitches all around the rim (from the side of the ribbing). Per 8 rows of ribbing, pick up 5 sts (see picture to the right). Then go on knitting in the round in stockinette stitch until the hat is as high as you want it to be.

For me this was the case, when the whole of the hat (ribbing plus main part) measured xx cm in height.

Distribute your stitches evenly on two needles and do a three-needle bind off - if you do this from the outside, the ears will stick out more prominently.

Weave in ends and enjoy wearing your hat!

Amplitude Cowl

I like cowls that are knitted flat. A technique that's better used on flat pieces than on pieces worked in the round is intarsia. Here's a new pattern for a knitted cowl with a wavy intarsia pattern in shape of a sinus curve. It's all in garter stitch and therefore very easy to knit.

This work by Knitting and so on is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.



Materials

• 100 grams of fingering weight yarn in color 1 (C1)
• 100 grams of fingering weight yarn in color 2 (C2)
• 3.5mm knitting needles - if you're using circulars you'll need another needle of roughly the same size (for grafting)
• a stitch marker
• a tapestry needle (for grafting)

Techniques and Notation

• Provisional CO: My favorite method for a provisional CO is the crochet provisional CO - it is shown in this Youtube video by New Stitch a Day.
• Intarsia: Changing colors with the intarsia technique - as shown in this YouTube video by knitwithpat; or this YouTube video by Francoise Danoy.
• Grafting in Garter Stitch: A technique to get an invisible (knitted) seam - this technique is shown in this YouTube Video by knittinghelp.com. 
• Throughout the pattern, the following notation will be used: k31 (C1); k29 (C2) means knit 31 stitches in color 1 and then 29 stitches in color 2 - i.e. color is indicated in brackets after the stitches and color changes are indicated by a semicolon.

Gauge and Size
9 ridges (i.e. 18 garter stitch rows) gave about 5 cm in height, and 11 stitches about 5 cm in width.
The cowl I knitted (with a total of 5 pattern repaeats) measures 24 cm in width and 140 cm in circumference.
If you have different gauge or want another width, cast on the appropriate (even) number of stitches and place the stitch marker in the middle of the row. To adjust for lenght, knit a different number of pattern repeats.

Instructions

Provisionally CO60 sts
Setup Row 1: (C1) k30, place marker (C2) k30
Ridge 1: (C1) k to m, k1, (C2) k to end;
   turn; (C2) k to 1 bef m, (C1), k to end
Ridge 2: (C1) k to m, k2, (C2) k to end;
   turn; (C2) k to 2 bef m, (C1), k to end
Ridge 3: (C1) k to m, k3, (C2) k to end;
   turn; (C2) k to 3 bef m, (C1), k to end
Ridge 4: (C1) k to m, k4, (C2) k to end;
   turn; (C2) k to 4 bef m, (C1), k to end
Ridge 5: (C1) k to m, k5, (C2) k to end;
   turn; (C2) k to 5 bef m, (C1), k to end
Ridge 6 = Ridge 5
Ridge 7: (C1) k to m, k6, (C2) k to end;
   turn; (C2) k to 6 bef m, (C1), k to end
Ridge 8 = Ridge 7
Ridge 9: (C1) k to m, k7, (C2) k to end;
   turn; (C2) k to 7 bef m, (C1), k to end
Ridge 10 = Ridge 9
Ridge 11 = Ridge 9
Ridge 12: (C1) k to m, k8, (C2) k to end;
   turn; (C2) k to 8 bef m, (C1), k to end
Ridge 13 = Ridge 12
Ridge 14 = Ridge 12

Ridge 15 = Ridge 12

Ridge 16 = Ridge 9

Ridge 17 = Ridge 9

Ridge 18 = Ridge 9

Ridge 19 = Ridge 7

Ridge 20 = Ridge 7

Ridge 21 = Ridge 5

Ridge 22 = Ridge 5

Ridge 23 = Ridge 4

Ridge 24 = Ridge 3

Ridge 25 = Ridge 2

Ridge 26 = Ridge 1

Ridge 27: (C1) k to m, (C2) k to end;
   turn; (C2) k to m, (C1), k to end

Ridge 28: (C1) k to 1 bef m, (C2) k to end;
   turn; (C2) k to m, k1, (C1), k to end

Ridge 29: (C1) k to 2 bef m, (C2) k to end;
   turn; (C2) k to m, k2, (C1), k to end

Ridge 30: (C1) k to 3 bef m, (C2) k to end;
   turn; (C2) k to m, k3, (C1), k to end
Ridge 31: (C1) k to 4 bef m, (C2) k to end;
   turn; (C2) k to m, k4, (C1), k to end
Ridge 32: (C1) k to 5 bef m, (C2) k to end;
   turn; (C2) k to m, k5, (C1), k to end
Ridge 33 = Ridge 32
Ridge 34: (C1) k to 6 bef m, (C2) k to end;
   turn; (C2) k to m, k6, (C1), k to end
Ridge 35 = Ridge 34
Ridge 36: (C1) k to 7 bef m, (C2) k to end;
   turn; (C2) k to m, k7, (C1), k to end
Ridge 37 = Ridge 36
Ridge 38 = Ridge 36
Ridge 39: (C1) k to 8 bef m, (C2) k to end;
   turn; (C2) k to m, k8, (C1), k to end
Ridge 40 = Ridge 39
Ridge 41 = Ridge 39
Ridge 42 = Ridge 39
Ridge 43 = Ridge 36
Ridge 44 = Ridge 36

Ridge 45 = Ridge 36

Ridge 46 = Ridge 34

Ridge 47 = Ridge 34

Ridge 48 = Ridge 32

Ridge 49 = Ridge 32

Ridge 50 = Ridge 31

Ridge 51 = Ridge 30
Ridge 52 = Ridge 29
Ridge 53 = Ridge 28
Ridge 54 = Ridge 27

Repeat ridges 1 to 54 until the piece is as long as you'd like it to be, but end with ridge 53.
For the cowl in the pictures I knitted the sequence a total of 5 times.

Put the stitches of the provisional CO on another knitting needle. Hold ends together (see photo above). Then graft in garter stitch as follows: (C1) graft to marker; (C2) graft to end.


Chart
Below you can find the pattern as a chart - not the total width but the interesting bit around the stitch marker.

• The dark purple line shows where the stitch marker is.
• The pink line shows where to change the knitting color. As an additional help, the numbers in the chart show, how far from the marker the color change happens, i.e. how many stitches before or after the marker.
• The background color (light pink or weight) is only there to make it easier to count the rows. It changes every 5 rows.

Cowls Knitted Flat

Personally I prefer infitity scarfs (or cowls) to flat scarfs, because they are more comfortable to wear (at least for me :) and the ends don't dangle around loosely. However, I usually prefer knitting flat to knitting in the round. So over the years I have created quite a few cowls that were knitted flat and later made into a tube (i.e. cowl) shape.

Any flat piece of cloth can be turned into a tube just by sewing the sides together, but with handknitted items it usually looks better to go for a techniques that makes the piece look seamless.

To avoid a visible seam - I prefer to use the following two techniques:

• Provisional CO: My favorite method for a provision CO is the crochet provisional CO - it is shown in this Youtube video by New Stitch a Day.
• Grafting: Grafting (or Kitchener stitch) is a way to join two piece of knitting in a manner that it is practically invisible. The best (free) information on grafting that I know of is a five part series on Interweave Knitting by Joni Coniglio. The first of these articles can be found here. Alternatively, you can also use a three needle BO to create a seam that is nearly invisible (it is show e.g. in this YouTube video by planetpurl)

Most of the patterns shown above are from this blog, but the list below includes lots of other  free patterns of other designers as well.

The following links show different techniques and how they are incorporated in flat-knitted cowl patterns. Starting off with patterns shown in the photo:

1. This was one of the first patterns I knitted back in 2011 (I had just taken up knitting again) and I really liked this cowl I found on Ravelry. It's called Color Theory and designed by Xandy Peters - even though it is easy to knit (in stripes with a slant) the effect is gorgeous. (Side note: this designer has other more stunning designs: here's her designer page on Ravelry, her YouTube channel and her blog are well worth a visit. Her patterns were the ones that made me try out stacked stitches ... which neatly leads to the second cowl :)
2. The Stack Overflow Cowl was my first attempt to knit stacked stitches.
3. As soon as I had seen patterns with short row waves, I wanted to knit something like that myself. One of the patterns that resulted was the Mixed Wave Cowl - it's not only knitted with short row waves but also slanted sideways.
4. Burgdorf Cowl: Modular knitting can also be turned into a cowl. 
5. Chevrons All Round Cowl: Knitted with two skeins of variegated yarn - and changing the yarn after every second row.
6. Patchwork Cowl: Another example of modular knitting
7. Jolly Waves Cowl: A combination of chevrons and short rows  
8. One of my first ventures into intarsia was the Ice Maiden Cowl. 

Other cowls that used different and interesting techniques are the following (patterns not pictured above). Unless otherwise indicated I have not tried to knit them, but I did like the design.

• Interesting Constructions:
• Esquina Cowl: consists of big mitred squares, great for variegated yarn and to avoid color pooling
• Tight Cowl Mitred Squares: In the words of the designer "This cowl is made of mitered squares. You only have to weave in 4 (!) ends, applied I-Cords make a good looking edge." (and I really like the idea of having only 4 ends to weave in :)
• Pivot Cowl - all in garter stitch but with an interesting shape consisting of two rectangles and a triangle (Ravelry link, direct link)
• F765 Three Color Cowl  - a combination of different patterns
• Dragon Wing Cowl - also available on Ravelry
• Mitred Mini Neckwarmer
• Ten Ten Cowl: with ruffles, also a combination of working flat and working in the round
• Color Flow Cowl:  with short rows in a contrast color and nobs - great effect and easy to knit
• Short rows: 
• Cubist Short Row Cowl: short rows used for graphic effect 
• Wurm Cowl: with short rows and shaping
• Challah Cowl: Short rows used for a three-dimensional effect
• Cables can also be encorporated in flat knitted cowls - here are some free patterns I liked very much: 
• Lava Flow Cowl (by Dixie Norton) - this pattern was the first piece I knitted with a reversible cable pattern. 
• Cowl for PtitPatate: combines different cable patterns 
• A Very Braidy Cowl: "big fat braided cables" (designer's words) - they are looking great.
• Knitted Plaid: How to knit plaid and fashion it into a cowl or collar is shown in this Knitty Pattern Princess Franklin Plaid Collar (Ravelry link here)
• Lace:
• Blue Glacier Cowl: with a checkerboard mesh 
• Seaspray Cowl: lace on a bias
• Orchid Cowl: In the words of the designer: "A little bit of stockinette stitch, a little bit of garter. Add a little bit of Spider lace stitch and it all adds up to a great little cowl!" Really nice combination.
• Colors:
• Daniel a diagonally striped cowl: Diagonal stripes in garter stitch 
• Romanov Cowl: In two colors with a slip stitch lattice pattern
• Unisex Neckwarmer Template Nr. 1: slip stitch knitting in two colors
• Changing Leaves Cowl or Scarf: with a design of falling leaves
• Pawprints: With pawprints in colorwork - lovely.
• Knit-Purl-Combinations: 
• Ninotchka Neck Warmer: Seed stitch with i-cord decoration
• Linienspiel - great effect of knits and purls 
• Around the Block - seed stitch

Of course there are lots of other great cowl patterns available. Therefore, finally, here's a link to get all free knitting patterns for cowls knitted flat (or rather patterns with the category "cowl" and the attribute "worked-flat") on Ravelry - and here's the link to get all pattens (not only the free one) with these attibutes.

Easter Bunny Egg Cozy

Lent started this week with Ash Wednesday. This means that Holy week is only 40 days away and it's time to start with some easter decoration projects.

This cute little knitted egg cozy is shaped like bunny head. It keeps your breakfast eggs warm and doubles as a lovely table decoration. It's knitted flat, all in garter stitch and in one piece - with short rows for shaping. It's a fun project for using up some leftover yarn and maybe nice for trying out short rows or a small 3D project for the first time.

This work by Knitting and so on is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.




Materials

• less than 10 grams of sports weight yarn
• 3mm needles
• a tapestry needle for grafting and for embroidering the face
• about 40 cm of scrap in a contrast color (I used fingering weight, you can use embroidery floss as well)
• scrap yarn for provisional CO

Techniques

• Provisional CO: My favorite method for a provision CO is the crochet provisional CO - it is shown in this Youtube video by New Stitch a Day.
• Knitted Cast-On: a method to cast on stitches at the side of your knitted piece - see this YouTube video 
• Short rows with wrap and turn (w+t) - as shown in this YouTube video by Very Pink Knits.
• Grafting in Garter Stitch: A technique to get an invisible (knitted) seam - this technique is shown in this YouTube Video by knittinghelp.com.

Instructions
Provisionally CO 24 sts
Setup row: k all
Ridge 1: k11, w+t, k to end
Ridge 2: k4, w+t, k to end
Ridge 3: k6, w+t, k to end

Ridge 4: k8, w+t, k to end
Ridge 5: k all, turn, k all
Ridge 6: k22, w+t, k9, w+t,
   k8, w+t, k7, w+t,
   k6, w+t, k5, w+t
   k4, w+t, k to end
Ridge 7: k all, turn, BO13, k to end
Ridge 8: k all, turn, k1, ssk, k to end
Ridge 9 and 10: k all, turn, k all
Ridge 11: k all, turn, k1, kfb, k to end
Ridge 12: k all, turn, k all
Ridge 13: k all, CO13 (with knitted CO), turn, k all
Ridge 14: k20, w+t, k4, w+t
   k5, w+t, k6, w+t
   k7, w+t, k8, w+t
   k9, w+t, k to end
Ridge 15: k11, w+t, k to end
Ridge 16: k4, w+t, k to end

Ridge 17: k6, w+t, k to end

Ridge 18: k8, w+t, k to end

Ridge 19: k all, turn, k all
Ridge 20: 22, w+t, k9, w+t,
   k8, w+t, k7, w+t,
   k6, w+t, k5, w+t
   k4, w+t, k to end
Ridge 21: k all, turn, BO13, k to end
Ridge 22: k all, turn, k1, ssk, k to end
Ridge 23 and 24: k all, turn, k all
Ridge 25: k all, turn, k1, kfb, k to end
Ridge 26: k all, turn, k all
Ridge 27: k all, CO13 (with knitted CO), turn, k all
Ridge 28:  k20, w+t, k4, w+t
   k5, w+t, k6, w+t
   k7, w+t, k8, w+t
   k9, w+t, k to end

Now your piece should look similar to picture 1. Put the stitches from the provisional CO on another needle, cut yarn, fold piece along the horizontal middle line and graft live stitches from the two needles together in garter stitch. Now your piece should look like photo no. 2.

Now, sew the upper edge together along the dotted line in photo 2. Turn back right sides out and it's finished.

Thread your tapestry needle with the yarn in contrast color and embroider face according to chart below (or the way you like it best).




Chart
The chart can be used as a complete pattern. The number on the top of a ridge indicates the number of k-stitches, i.e. of blank rectangles (the w+t is the next stitch).

Easter Bunny Egg Cozy Chart - click on picture to enlarge or here for chart as PDF (link updated 03.10.21)

 

This post was featured at the New Tuesday PINspiration Link Party, at the Funtastic Friday Link Party No. 122 and at the Sew Can Do Easter Craftastic Monday Link Party. Thank you!