Mittwoch, 18. Juni 2014

Starburst Mitts

Free Knitting Pattern: Starburst Mitts
Knitted flat these mitts use short
rows to form a circle around the thumb.
When I first knitted the Circle Mitts, I thought that it might be a good idea to knit something similar but at right angles to them – while the Circle Mitts are knitted around the circumference, the mitts described here are knitted along the radius.



Creative Commons License
This work by Kntting and so on is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.



Print Friendly and PDF

The finished mitts measure about 16 cm in circumference (around the wrists) and 18 cm high. (Gauge in garter stitch: 6 stitches and 14 rows/7ridges = 1 inch)

A crochet version of these mitts is available here: Sparkler Mitts.

A video tutorial in Japanese has been provided by Kabosu (かぼすの手しごと) on YouTube. You can find it here (part 1).and here (part 2).


Materials:
  • 35 grams of fingering weight yarn (I used Froehlich Wolle Blauband Special, Color 7481 (dunkelgrau/dark grey))
  • 3mm knitting needles
  • 4 stitch marker (2 of which safety pins of similar)
  • tapestry needle (for grafting and to weave in ends)

Techniques:
  • Short Rows: Short rows are one of my favorite knitting techniques because they not only allow you to shape your knitting but also to created interesting graphical pattern. There are several techniques for short rows – and it’s a matter of taste which one you prefer. I’ve recently learned a technique called German short rows: when you turn, bring yarn to the front and pull it back so that a sort of double-stitch is created, then knit back as usual - when you have to knit the double-stitch, be careful to knit it as one stitch (see also https://www.youtube.com/watch?v=P6n561SMZXQ); this method has the advantage the no picking up of stitches is necessary. In the pattern, this stitch will be called t+p (turn and pull).
  • Provisional Cast-On: This method of cast-on usually uses some waste yarn that can be remove later to get live stitches, these stitches can either be used to continue knitting in the opposite direction or to graft these stitches to the rest of your piece. My favourite method is the one using a crochet hook (http://www.youtube.com/watch?v=UeExgbgTOgs). The first time you use your working yarn, will be called row 0 in this pattern.
    There are other methods as well. E.g. the one explained in knitty (http://www.knitty.com/ISSUEfall05/FEATfall05TT.html). If you use this method, you don’t need to knit the row number 0, because you already have your first row of stitches in working yarn.
  • Grafting: Grafting (also called kitchener stitch) is a great way to finish garments without a visible seam (If you want to know more about grafting – it’s different stitches and mechanics – you should read the “5 Grafting Myths”-series by Joni Coniglio on knittingdaily.com).
    To finish these mitts you need to be able to graft both in stockinette and in garter stitch.
    • Grafting in stockinette (and here’s a video from knittinghelp.com that shows the technique: http://www.knittinghelp.com/video/play/grafting-garter-kitchener-stitch):
      Set-up stitch:
      - front needle: insert purlwise and leave stitch on needle;
      - back needle: insert knitwise and leave stitch on needle;
      Then repeat the following actions:
      - front needle: insert knitwise needle into first and slide from needles (knit slip), insert needle purlwise into next stitch and leave on needle (purl leave)
      - back needle: insert purlwise needle into first and slide from needles (knit slip), insert needle knitwise into next stitch and leave on needle (purl leave)
    • Grafting in garter stitch (and here’s a video from knittinghelp.com that shows the technique: www.knittinghelp.com/video/play/grafting-garter-kitchener-stitch):
      Set-up stitch:
      - front needle: insert purlwise and leave stitch on needle;
      - back needle: insert purlwise and leave stitch on needle;
      Then repeat the following actions:
      - front needle: insert knitwise needle into first and slide from needles (knit slip), insert needle purlwise into next stitch and leave on needle (purl leave)
      - back needle: insert knitwise needle into first and slide from needles (knit slip), insert needle purlwise into next stitch and leave on needle (purl leave)

  • Picking up stitches from the edge and joining as you go: to attach the first stitch of one row to the edge stitch of the row opposite, slip the last stitch and insert the right needle in a loop from the opposite side, reinsert the left needle into the last 2 loops and knit them together (like doing a ssk); this will be called ssk+c (ssk and connect) in this pattern - a similar method is shown in this video: http://youtu.be/3zPXZ4cu66Q
    Alternatively, you can just knit the last stitch of each row in section F and G and sew the two sides together afterwards.


General Construction:
The mitts are knitted flat in eight sections (from A to H).
The diagram shows how  shows how the sections form the complete mitt, how many stitches there are in between the edge and M1, as well as how the stitch count changes.
It also shows the mitt is to be folded and which parts are to be attached to which when finishing the mitts (or while you're knitting section F and G).
Sections E, F, G, and H are mirror images of sections D, C, B, and A respectively, i.e. where there is an increase in A, there is an decrease in H - and the short row lenghts are mirrored as well.


Instructions:
Provisional CO22 stitches
Row 0: k6 pm (-> this marker will be called M2), k4 pm (-> this marker will be called M1), k12

Section A
Ridge 1: sl1, k to end, turn; sl1 p5, k to end
Ridge 2: sl1, k10, t+p, k to end
Ridge 3: sl1, k5, t+p, k to end

Ridge 4: sl1, k8,  t+p, k to end
Ridge 5: sl1, k to M2,  t+p, k to last 2 stitches, kfb, k
Ridge 6: sl1, k7,  t+p, k to end
Ridge 7: sl1, k12,  t+p, k to end
Ridge 8: sl1, k6,  t+p, k to end
Ridge 9: sl1, k to 2 sts before M2,  t+p, k to end
Ridge 10: sl1, k9,  t+p, k to last 2 stitches, kfb, k
Ridge 11: sl1, k8,  t+p, k to end
Ridge 12: sl1, k4,  t+p, k to end
Ridge 13: sl1, k7,  t+p, k to end
Ridge 14: sl1, k to M2, p to end, turn; sl1, k to end
Ridge 15: sl1, k6,  t+p, k to last 2 stitches, kfb, k
Ridge 16: sl1, k4,  t+p, k to end
Ridge 17: sl1, k2,  t+p, k to end
Place marker (e.g. safety pin) in the first stitch on your needles ("marker A")

Section B

Ridge 18: sl1, k to end, turn; sl1 p5, k to end
Ridge 19: sl1, k2,  t+p, k to end
Ridge 20: sl1, k6,  t+p, k to end
Ridge 21: sl1, k4,  t+p, k to end
Ridge 22: sl1, k to M2,  t+p, k to end
Ridge 23: sl1, k7,  t+p, k to end
Ridge 24: sl1, k13,  t+p, k to end
Ridge 25: sl1, k8,  t+p, k to end
Ridge 26: sl1, k9,  t+p, k to end
Ridge 27: sl1, k to 2 sts before M2, t+p, k to last 2 stitches, kfb, k
Ridge 28: sl1, k5,  t+p, k to end
Ridge 29: sl1, k8,  t+p, k to end
Ridge 30: sl1, k11,  t+p, k to end
Ridge 31: sl1, k to M2, p6, turn; sl1, k to end
Ridge 32: sl1, k10,  t+p, k to end
Ridge 33: sl1, k15,  t+p, k to end

Section C
Ridge 34: sl1, k to end; turn; sl1 p5, k to end
Ridge 35: sl1, k12,  t+p, k to end
Ridge 36: sl1, k15,  t+p, k to end
Ridge 37: sl1, k8,  t+p, k to end
Ridge 38: sl1, k to M2,  t+p, k to end
Ridge 39: sl1, k7,  t+p, k to end
Ridge 40: sl1, k14,  t+p, k to end
Ridge 41: sl1, k10,  t+p, k to end
Ridge 42: sl1, k6,  t+p, k to end
Ridge 43: sl1, k13,  t+p, k to last 2 stitches, kfb, k
Ridge 44: sl1, k10,  t+p, k to end
Ridge 45: sl1, k to M2, p6; turn; sl1, k to end
Ridge 46: sl1, k7, t+p, k to last 2 stitches, kfb, k
Ridge 47: sl1, k12,  t+p, k to end
Ridge 48: sl1, k16,  t+p, k to end
Ridge 49: sl1, k5,  t+p, k to last 2 stitches, kfb, k
Ridge 50: sl1, k to 2 sts before M2,  t+p, k to end
Ridge 51: sl1, k10,  t+p, k to end
Ridge 52: sl1, k7,  t+p, k to last 2 stitches, kfb, k
Ridge 53: sl1, k18,  t+p, k to end
Ridge 54: sl1, k8,  t+p, k to end
Ridge 55: sl1, k to end; turn; sl1 p5, k to last 2 stitches, kfb, k
Ridge 56: sl1, k3,  t+p, k to end
Ridge 57: sl1, k4,  t+p, k to end
Place marker (e.g. safety pin) in the first stitch on your needles (marker C)

Section D
Ridge 58: sl1, k to M2, p6, turn; sl1 k to end
Ridge 59: sl1, k2, t+p, k to end
Ridge 60: sl1, k8, t+p, k to end
Ridge 61: sl1, k4, t+p, k to end
Ridge 62: sl1, k15,  t+p, k to end
Ridge 63: sl1, k to M2,  t+p, k to end
Ridge 64: sl1, k7, t+p, k to end
Ridge 65: sl1, k13, t+p, k to end
Ridge 66: sl1, k9, t+p, k to last 3 sts, ssk, k
Ridge 67: sl1, k19,  t+p, k to end
Ridge 68: sl1, k7,  t+p, k to end
Ridge 69: sl1, k12,  t+p, k to end
Ridge 70: sl1, k to 2 sts before M2,  t+p, k to end
Ridge 71: sl1, k7, t+p, k to end
Ridge 72: sl1, k11,  t+p, k to end
Ridge 73: sl1, k8, t+p, k to end
Ridge 74: sl1, k16,  t+p, k to end
Ridge 75: sl1, k to end; turn; sl1, p5, k to end
The photo shows how the mitt should look after finishing section D.

Section E (= Section D backwards)
Ridge 76: sl1, k to M2, p6; turn, sl1 k to end
Ridge 77: sl1, k16, t+p, k to end
Ridge 78: sl1, k8, t+p, k to end
Ridge 79: sl1, k11, t+p, k to end
Ridge 80: sl1, k7, t+p, k to end
Ridge 81: sl1, k to 2 sts before M2, t+p, k to end
Ridge 82: sl1, k12, t+p, k to end
Ridge 83: sl1, k7, t+p, k to end
Ridge 84: sl1, k19, t+p, k to end
Ridge 85: sl1, k9, t+p, k to last 2 sts, kfb, k
Ridge 86: sl1, k13, t+p, k to end
Ridge 87: sl1, k7, t+p, k to end
Ridge 88: sl1, k to M2, t+p, k to end
Ridge 89: sl1, k15, t+p, k to end
Ridge 90: sl1, k4, t+p, k to end
Ridge 91: sl1, k8, t+p, k to end
Ridge 92: sl1, k2, t+p, k to end
Ridge 93: sl1, k to end, turn; sl1, p5, k to end

Section F (= Section C backwards)
During section F, you will attach the last stitch of each ridge with an edge stitch of section C (and during section G with and edge stitch of section B). For this you need to fold the mitt along the folding line and attach the sides as you go along - as explained above in "Techniques".
The picture on the right shows how the mitt looks after you have knitted a few rows of section F when you connect the halves as you go.

Alternatively, you can just knit the last stitch of each row of section F and G; and sew the two edges together afterwards.

Ridge 94: sl1, k4, t+p, k to end
Ridge 95: sl1, k3, t+p, k to last stitch, ssk+c (with edge stitch of ridge 56, i.e. one below stitch marker C) - the abbreviation ssk+c is explained above in "Techniques"
Ridge 96: sl1, k to M2, p to end; turn; sl1, k to last 3 stitches, ssk, ssk+c (with edge stitch of ridge 55)
Ridge 97: sl1 k8, t+p, k to last stitch, ssk+c (with edge stitch of ridge 54
Ridge 98: sl1, k18, t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section C)
Ridge 99: sl, k7, t+p, k to last 3 stitches, ssk, ssk+c (with edge stitch of next ridge of section C)
Ridge 100: sl1, k10, t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section C)
Ridge 101: sl1,  k to 2 sts before M2, t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section C)
Ridge 102: sl1, k5,  t+p, k to last 3 stitches, ssk, ssk+c (with edge stitch of next ridge of section C)
Ridge 103: sl1, k16, t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section C)
Ridge 104: sl1, k12, t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section C)
Ridge 105: sl1, k7,  t+p, k to last 3 stitches, ssk, ssk+c (with edge stitch of next ridge of section C)
Ridge 106: sl1, k to M2 , t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section C)
Ridge 107: sl1, k10,  t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section C)
Ridge 108: sl1, k13,  t+p, k to last 3 stitches, ssk, ssk+c (with edge stitch of next ridge of section C)
Ridge 109: sl1, k6,  t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section C)
Ridge 110: sl1, k10,  t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section C)
Ridge 111: sl1, k14,  t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section C)
Ridge 112: sl1, k7,  t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section C)
Ridge 113: sl1, k to end; turn; sl1, p5, k to last stitch, ssk+c (with edge stitch of next ridge of section C)
Ridge 114: sl1, k8,  t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section C)
Ridge 115: sl1, k15,  t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section C)
Ridge 116: sl1, k12,  t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section C)
Ridge 117: sl1, k to M2, p6; turn; k to last stitch, ssk+c (with edge stitch of next ridge of section C)

Section G (= Section B backwards)
Ridge 118: sl1, k15,  t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section B)
Ridge 119: sl1, k10,  t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section B)
Ridge 120: sl1, k to end; turn; sl1, p5, k to last stitch, ssk+c (with edge stitch of next ridge of section B)
Ridge 121:  sl1, k11,  t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section B)
Ridge 122:  sl1, k8,  t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section B)
Ridge 123:  sl1, k5,  t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section B)
Ridge 124:  sl1, k to 2 sts before M2,  t+p, k to last 3 stitches, ssk, ssk+c (with edge stitch of next ridge of section B)
Ridge 125:  sl1, k9,  t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section B)
Ridge 126:  sl1, k8,  t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section B)
Ridge 127:  sl1, k13,  t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section B)
Ridge 128:  sl1, k7,  t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section B)
Ridge 129:  sl1, k to M2,  t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section B)
Ridge 130:  sl1, k4,  t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section B)
Ridge 131:  sl1, k6,  t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section B)
Ridge 132:  sl1, k2,  t+p, k to last stitch, ssk+c (with edge stitch of next ridge of section B)
Ridge 133:  sl1, k to M2, p6; turn; sl1 k to last stitch, ssk+c (with edge stitch of next ridge of section B)
(Now the side seam is finished.)

Section H (= Section A backwards)
Ridge 134:  sl1, k2, t+p, k to end
Ridge 135:  sl1, k4, t+p, k to end
Ridge 136:  sl1, k6, t+p, k to last 3 stitches, ssk, k
Ridge 137:  sl1, k to end; turn; sl1, p5, k to end
Ridge 138:  sl1, k7, t+p, k to end
Ridge 139:  sl1, k4, t+p, k to end
Ridge 140:  sl1, k8, t+p, k to end
Ridge 141:  sl1, k9, t+p, k to last 3 stitches, ssk, k
Ridge 142:  sl1, k to 2 sts before M2, t+p, k to end
Ridge 143:  sl1, k6, t+p, k to end
Ridge 144:  sl1, k12, t+p, k to end
Ridge 145:  sl1, k7, t+p, k to end
Ridge 146:  sl1, k to M2, t+p, k to last 3 stitches, ssk, k
Ridge 147:  sl1, k8, t+p, k to end
Ridge 148:  sl1, k5, t+p, k to end
Ridge 149:  sl1, k10, t+p, k to end

Finishing
Cut yarn but leave a tail of about 50 cm. Take out your scrap yarn of the provisional cast on and put the live stitches on a knitting needle. Graft in garter stitch till M2, then finish grafting in stockinette stitch. Make sure to treat the double-stitch as one stitch.
If you haven't connected the edges during sections F and G, sew sides together.
Weave in ends.

Make two.


Free Knitting Pattern: Starburst Mitts


This post was featured on EyeLoveKnots Yarn Fanatic Party #27

Yarn Fantastic Link Party

25 Kommentare:

  1. These Mitts are wonderful - such a clever design. Thank you for giving so much detail about how to make them. I have bookmarked your post and I'd love to try this when I have time :)

    AntwortenLöschen
    Antworten
    1. Thank you very much - I'm glad you like them :)

      Löschen
  2. These are really pretty! I love the colorway you've chosen for both pair!

    AntwortenLöschen
    Antworten
    1. Thank you. The yarn is called Froehlich Wolle Special Blauband - unfortunately, I lost the label so I don't know the colourway.

      Löschen
  3. What is t+p? That is the only part that has me confused. Thanks for the awesome pattern though. It looks like fun to knit!

    AntwortenLöschen
    Antworten
    1. It's the abbreviation I use for "turn and pull" which you have to do for German Short Rows - please see the techniques section in the pattern:

      German short rows: when you turn, bring yarn to the front and pull it back so that a sort of double-stitch is created, then knit back as usual - when you have to knit the double-stitch, be careful to knit it as one stitch (see also https://www.youtube.com/watch?v=P6n561SMZXQ); this method has the advantage the no picking up of stitches is necessary. In the pattern, this stitch will be called t+p (turn and pull).

      If you happen to know a standard abbreviation for this, please let me know.

      Löschen
  4. I love the way these look; they are the first pair of mitts that has ever made me want to knit some. :-)

    AntwortenLöschen
  5. Brilliant pattern. Thanks for sharing

    AntwortenLöschen
  6. I love these, I am learning to knit so I can make cool things like this!

    AntwortenLöschen
  7. I haven't knitted in years, and it's projects like this that make me want to pick it up again. Absolutely beautiful!
    -Found you through the Yarn Fanatic Party
    Jenny from crochetistheway.blogspot.com

    AntwortenLöschen
    Antworten
    1. Thank you! I really like your seashell washcloths!

      Löschen
  8. I am so glad you came back to party with us this week! I have chosen these mitts as one of my Yarn Favorites, and featured in this week's party. #27 is live - http://eyeloveknots.blogspot.com/2015/03/yarn-fanatic-linky-party-27.html. I will also be sharing with my EyeLoveKnots Facebook fans Wednesday afternoon, and pinning to my Hobby: When I Learn to Knit board.
    Thanks so much for sharing, and I hope you will come back to party with us again real soon!
    Alexandra
    EyeLoveKnots.blogspot.com
    Facebook.com/EyeLoveKnots
    Pinterest.com/ardnaxelarichar

    AntwortenLöschen
  9. Dieser Kommentar wurde vom Autor entfernt.

    AntwortenLöschen
  10. First of all, I love this pattern and am making it right now which is why I have a question. Since you said the sections mirrored one another shouldn't ridge 136 be: sl1, k6, t+p, k to last 3 stitches, ssk, k. I was just wondering because otherwise there would be two pulled stitches right on top of each other.
    Bye, Betty

    AntwortenLöschen
    Antworten
    1. Hi Betty,
      you're absolutely right. I have corrected it.
      Thank you very much. I really appreciate this.
      SR

      Löschen
  11. You're welcome. I love your designs and am looking forward to trying new ones. Keep up the great work :)

    AntwortenLöschen
  12. Love these, I've just knit a pair for my Mum for Christmas.
    I managed to knit them seamlessly. I did a provisional CO and knit segments H then A, then I picked up the stitches at the CO and knit the first wedge of B on one side and then the other and so on for segments B and C, essentially knitting F and G backwards at the same time. Then left one side and knitted segments D and E and did a three needle cast off.

    AntwortenLöschen
    Antworten
    1. Wow. That's a clever way to knit them! (And it might even give me a new design idea :)
      Thanks ♥

      Löschen
  13. Grand Merci pour ces explications très détaillées, j'adore, je vais essayer aujourd'hui même

    AntwortenLöschen
  14. I've just finished one and I love it. I made it flat, because I could see it would be too small and I wanted to be able to make an adjustment. What I did was - after I knit the whole thin, I picked up stitches all around, (on 2 circular needles) and added 3 rows - ribbing in the open parts and garter for the closed parts. I bound off the ribbing parts and grafted the garter. Came out great. But one question... why put M1 marker? It's not really used when doing the knitting.

    AntwortenLöschen
  15. Love these mitts. I'm a huge fan of the crochet version. I've made about 20 pairs so far, so I thought it time to try the knitted version. They're so quick and easy, and the finished mitt is gorgeous! Thank you.

    AntwortenLöschen