Nice Little Yarnbomb

As seen on a lovely spring morning in Konstanz.

Geranium Knitted Slippers

I am currently going through a "slipper phase" and I am experimenting a bit with the idea. I've not come to different constructions (yet?), but there is no harm in knitting something not so complicated once in a while.

So, here's a variation for the April Knitted Slippers I published a few weeks ago, a seamless, toe-up pattern. Actually, the only difference lies in a triangular garter stitch pattern on the top of the foot.

This work by Knitting and so on is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.




Materials

• about 40 to 50 grams of fingering weight yarn
• 3mm knitting needles (dpns or circular)
• three stitch markers
• a tapestry needle for grafting and to weave in ends

Techniques

• Cutting a sock template of your feet: To make the finished piece fit your feet, it is useful to measure your feet and to cut out a card template. Here's a blogpost at knitbettersocks.blogspot.com that explains the idea. For the heel as knitted here, make a mark at 5 cm from the end of the heel.
  If you want to knit a pair for someone else and cannot get a template, here are standard shoe size templates.  
• Judy's Magic Cast-On is a technique that gives you live stitches on both sides of your needle - it is generally used for toe-up socks (e.g. in this pattern), but it can be used for other purposes as well. Here's a written description (from Knitty) and here's a YouTube-video by Cat Bordhi and another YouTube-video by Very Pink Knits.
• Central double decrease: as shown in this YouTube-video by Knit Purl Hunter.
• Garter stitch grafting: Here's a video by Knittinghelp.com that shows garter stitch grafting.

Instructions

Make a cardboard template of your feet. Draw a line that marks half the length of your feet ("half line") - see picture on the right. The heel line will be drawn once you've finished knitting your toe.

Part 1 (Toe, worked in the round):

Magic CO 12 stitches per needle (your piece should look like illustration photo 1)
Knit one round and place one marker after 12 sts and another marker at the end of the round.

To get a shaped toe you first do 4 rounds with 4 increases each (around the markers). Then you alternate 1 neutral round (no increases) with 1 increase round (increases around the markers) twice. Then alternate 2 neutral rounds and 1 increase round - twice. Then alternate 3 neutral rounds and 1 increase round - and repeat this (3 neutral, 1 increase round) until the slipper is wide enough to fit your feet.

In order to mirror the increases in the toe, with decreases in the heel, I find that it helps to keep notes. I usually keep a tally: one normal tick for a neutral row, one squiggly line for an increase row.

Spelled out this means:
Round 0 (knitted directly after Magic CO): k12, place marker, k12, place marker (these markers will be called side markers).
Round 1 (Increase round): kfb, k to 1 st before marker kfb, slip marker, kfb, k to last st, kfb
Rounds 2 - 4: Increase rounds (= round 1)
Round 5: k all
Round 6: Increase round
Round 7: Neutral round (=  round 5)
Round 8: Increase round
Round 9, 10: Neutral round
Round 11: Increase round
Round 12, 13: Neutral round
Round 14: Increase round
Round 15, 16, 17: Neutral round
Round 18: Increase round
Repeat Rounds 15-18 until the piece is wide enough to fit your foot.

After you've finished your toe - measure its length. Then draw a line on your template that's the same distance from the heel end. This line is called toe line on the picture above. Heel and toe will have the same length since the heel decreases will be exactly like the toe increases - backwards.

Depending on the yarn, I had 56 or 60 stitches in total on my needles.

Part 2 (worked in the round):

Count the number of stitches on your needles. Divide by 4 and remember this number. (For 56 stitches, this number was 14 - for 60 stitches in total, it was 15.)

When you knit the first round, knit the calculated number of stitches, place a marker here ("mid marker) and knit on. Leave the side markers in, they will be needed later.

Knit rounds until your piece is about 5 cm short of the half line.

Triangle Pattern

Then start the triangle pattern (see schematic) around the mid marker. All stitches that are not noted in the schematic are knit stitches.

Spelled out this means
Round 1: k to 2 sts bef mid marker, p2, k to end
Round 2: k to mid marker, p2, k to end
Round 3: k to 4 sts bef mid marker, p4, k to end
Round 4: k to mid marker, p4
Round 5: k to 6 sts before mid marker, p6, k to end
Round 6: k to mid marker, p6, k to end

I guess the general idea is clear, knit 2 more purl stitches to either side of the mid marker every second row.

Or put in general terms:
Round X (odd numbered round): k to X+1 sts before mid marker, p X sts, k to end
Round X+1 (even numbered round): k to mid marker, p X+1 sts, k to end

Go on until all stitches between the side markers have been purled at least once. End with an odd-numbered row.


Part 3 (worked in rows):

Row 0: Knit to mid marker and turn.
Row 1 (WS, inside): sl1, k to marker, p to marker, k to end of row marker and turn
Row 2 (RS, outside), sl1, k all (to end of row marker) and turn

Repeat rows 1 and 2 a total of 4 times

Row 9 (WS) = Row 1
Row 10 (RS), sl1, kfb, k to 2 sts before end, kfb, k1

Repeat rows 1 to 10 once more.

Repeat rows 1 and 2 until the piece is long enough to reach the heel line.

After a while you will see the end of row without the mid marker, so you can remove it.

Part 4a (Heel, worked in rows):

To get a shaped heel you have to decrease the part between the markers the same way that the increases in part 1 were done on one side of the toe.
This means that you will alternate between one decrease row and 3 normal rows (just as many times as you did for the toe), then twice alternate between one decrease row and 2 normal rows, then alternate twice one decrease row and one normal row, and then knit only decrease rows until there are only 12 stitches between your markers.

A normal row is knitted as follows:
Normal Row (RS): sl1, k all
Normal Row (WS): sl1, k to marker, slip marker, p to marker, slip marker, k to end.

And a decrease row is knitted as follows
Decrease row (RS): sl1, k to marker, slip marker, ssk, k to 2 bef marker, k2tog, slip marker, k to end
Decrease row (WS): sl1, k to marker, slip marker, p2tog, p to 2 bef marker, p2togtbl, slip marker, k to end

Assuming that you knitted 18 rows for the toe, the heel would be knitted as follows:
R1 (RS, decrease row): sl1, k to marker, slip marker, ssk, k to 2 bef marker, k2tog, slip marker, k to end
R2 (WS, normal row): sl1, k to marker, slip marker, p to marker, slip marker, k to end.
R3 (RS, normal row): sl1, k to end
R4 (WS, normal row): sl1, k to marker, slip marker, p to marker, slip marker, k to end.
R5 (RS, decrease row): sl1, k to marker, slip marker, ssk, k to 2 bef marker, k2tog, slip marker, k to end
R6 (WS, normal row): sl1, k to marker, slip marker, p to marker, slip marker, k to end.
R7 (RS, normal row): sl1, k to end
R8 (WS, decrease row):  sl1, k to marker, slip marker, p2tog, p to 2 bef marker, p2togtbl, slip marker, k to end
R9 (RS, normal row): sl1, k to end
R10 (WS, normal row): sl1, k to marker, slip marker, p to marker, slip marker, k to end.
R11 (RS, decrease row): sl1, k to marker, slip marker, ssk, k to 2 bef marker, k2tog, slip marker, k to end
R12 (WS, normal row): sl1, k to marker, slip marker, p to marker, slip marker, k to end.
R13 (RS, decrease row): sl1, k to marker, slip marker, ssk, k to 2 bef marker, k2tog, slip marker, k to end
R14 (WS, normal row): sl1, k to marker, slip marker, p to marker, slip marker, k to end.
R15 (RS, decrease row): sl1, k to marker, slip marker, ssk, k to 2 bef marker, k2tog, slip marker, k to end
R16 (WS. decrease row): sl1, k to marker, slip marker, p2tog, p to 2 bef marker, p2togtbl, slip marker, k to end
R17 (RS, decrease row): sl1, k to marker, slip marker, ssk, k to 2 bef marker, k2tog, slip marker, k to end
R18 (WS. decrease row): sl1, k to marker, slip marker, p2tog, p to 2 bef marker, p2togtbl, slip marker, k to end

Photos of working that kind of heel can be found in the April Knitted Slippers pattern on this blog.

Part 4b: Heel flap (worked in rows)

Now only one of the upper parts (in garter stitch) is worked, the stitches between the markers will be decreased row-by-row and the second garter stitch bit will not be worked until the kitchener stitch in the end.

Row 1: sl1, k to marker, ssk, turn, sl1, k to end
Repeat row 1 until there are only two stitches between the two markers

Then knit the following (last) row: sl1, k to 1 sts before marker, do a double central decrease

Now there should be the same number of stitches on both needles.
Graft in garter stitch.

Weave in ends.
Make two.

This pattern was featured at Purfylle Pinbellish Link Party No. 36 and on Awesome Life Friday #67. Thank you!

 

Abstract Art? ... a Design Fail and a Trick

Recently I got a lovely present from my former team - a gift voucher for Magliamania a store with beautiful hand dyed yarns in Berne, Switzerland. They have a web shop, too, but - if ever you're in Berne - go there. The yarns and the colors are just beautiful. (No, I'm not sponsored by them nor affiliated in any way - I just like the yarn and the shop.)

After I bought 4 skeins of a silk merino blend (2 blue, 1 white and 1 dark brown) - this yarn feels wonderful to the touch - and I thought long about how to use them. I decided on a bold geometrical pattern - as shown on the photo below.

But I don't really like the whole effect enough to wear it. So, this attempt at a scarf will be frogged. And I'will do something better with this wonderful yarn - even though I don't know exactly what ... yet.

However, here's a tip if you are like me, i.e. try out a lot of stuff but also frog a lot, but you do not want to cut your yarn:

• If you use yarn for one color block and want to use it again later in the project, Don't cut your yarn, but let it hang in a long loop between color blocks (see photo). Had my ideas worked out, I would've cut the yarn then and would've woven in the ends afterwards. Now that I frog it, I have the yarn still in one long piece.

Maybe this will help you sometime.

April Knitted Slippers

A cozy pair of slippers to warm your feet on a lazy afternoon at home. They also make great gifts for a loved one. 

The slippers are knitted from the toe up and without a seam. The sole is all in stockinette stitch while the upper part switches to garter stitch.

These slippers look best when knitted with some self-striping sock yarn.





This work by Knitting and so on is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.



This pattern is also listed at AllFreeKnitting.com.


Materials

• about 40 to 50 grams of fingering weight yarn
• 3mm knitting needles (dpns or circular)
• three stitch markers
• a tapestry needle for grafting and to weave in ends

Techniques

• Cutting a sock template of your feet: To make the finished piece fit your feet, it is useful to measure your feet and to cut out a card template. Here's a blogpost at knitbettersocks.blogspot.com that explains the idea. For the heel as knitted here, make a mark at 5 cm from the end of the heel.
  If you want to knit a pair for someone else and cannot get a template, here are standard shoe size templates.  
• Judy's Magic Cast-On is a technique that gives you live stitches on both sides of your needle - it is generally used for toe-up socks (e.g. in this pattern), but it can be used for other purposes as well. Here's a written description (from Knitty) and here's a YouTube-video by Cat Bordhi and another YouTube-video by Very Pink Knits.
• Central double decrease: as shown in this YouTube-video by Knit Purl Hunter.
• Garter stitch grafting: Here's a video by Knittinghelp.com that shows garter stitch grafting.

Instructions

Make a cardboard template of your feet. Draw a line that marks half the length of your feet ("half line") - see picture on the right. The heel line will be drawn once you've finished knitting your toe.

Part 1 (Toe, worked in the round):

Magic CO 12 stitches per needle (your piece should look like illustration photo 1)
Knit one round and place one marker after 12 sts and another marker at the end of the round.

To get a shaped toe you first do 4 rounds with 4 increases each (around the markers). Then you alternate 1 neutral round (no increases) with 1 increase round (increases around the markers) twice. Then alternate 2 neutral rounds and 1 increase round - twice. Then alternate 3 neutral rounds and 1 increase round - and repeat this (3 neutral, 1 increase round) until the slipper is wide enough to fit your feet.

In order to mirror the increases in the toe, with decreases in the heel, I find that it helps to keep notes. I usually keep a tally: one normal tick for a neutral row, one squiggly line for an increase row.

Spelled out this means:
Round 0 (knitted directly after Magic CO): k12, place marker, k12, place marker
Round 1 (Increase round): kfb, k to 1 st before marker kfb, slip marker, kfb, k to last st, kfb
Rounds 2 - 4: Increase rounds (= round 1)
Round 5: k all stitches
Round 6: Increase round
Round 7: Neutral round (= round 5)
Round 8: Increase round
Round 9, 10: Neutral round
Round 11: Increase round
Round 12, 13: Neutral round
Round 14: Increase round
Round 15, 16, 17: Neutral round
Round 18: Increase round
Repeat Rounds 15-18 until the piece is wide enough to fit your foot.

After you've finished your toe - measure its length. Then draw a line on your template that's the same distance from the heel end. This line is called toe line on the picture above. Heel and toe will have the same length since the heel decreases will be exactly like the toe increases - backwards.

Depending on the yarn, I had 56 or 60 stitches in total on my needles.

 
Part 2 (worked in the round):
Knit rounds until your piece is long enough to reach the half line.
Leave the markers in, they will be needed later.

Part 3 (worked in rows):
Count the number of stitches on your needles. Divide by 4 and remember this number. (For 56 stitches, this number was 14 - for 60 stitches in total, it was 15.)

Row 0: Knit the calculated number of stitches, place a marker here ("end of row marker) and turn.
Row 1 (WS, inside): sl1, k to marker, p to marker, k to end of row marker and turn
Row 2 (RS, outside), sl1, k all (to end of row marker) and turn

Repeat rows 1 and 2 a total of 4 times

Row 9 (WS) = Row 1
Row 10 (RS), sl1, kfb, k to 2 sts before end, kfb, k1

Repeat rows 1 to 10 once more.

Repeat rows 1 and 2 until the piece is long enough to reach the heel line.

After a while you will see the end of row without the marker, so you can remove it.

Illustration Photos

Part 4a (Heel, worked in rows):

To get a shaped heel you have to decrease the part between the markers the same way that the increases in part 1 were done on one side of the toe.
This means that you will alternate between one decrease row and 3 normal rows (just as many times as you did for the toe), then twice alternate between one decrease row and 2 normal rows, then alternate twice one decrease row and one normal row, and then knit only decrease rows until there are only 12 stitches between your markers.

A normal row is knitted as follows:
Normal Row (RS): sl1, k all
Normal Row (WS): sl1, k to marker, slip marker, p to marker, slip marker, k to end.

And a decrease row is knitted as follows
Decrease row (RS): sl1, k to marker, slip marker, ssk, k to 2 bef marker, k2tog, slip marker, k to end
Decrease row (WS): sl1, k to marker, slip marker, p2tog, p to 2 bef marker, p2togtbl, slip marker, k to end

Photo illustration 2 shows how the piece should look after a while.

Assuming that you knitted 18 rows for the toe, the heel would be knitted as follows:
R1 (RS, decrease row): sl1, k to marker, slip marker, ssk, k to 2 bef marker, k2tog, slip marker, k to end
R2 (WS, normal row): sl1, k to marker, slip marker, p to marker, slip marker, k to end.
R3 (RS, normal row): sl1, k to end
R4 (WS, normal row): sl1, k to marker, slip marker, p to marker, slip marker, k to end.
R5 (RS, decrease row): sl1, k to marker, slip marker, ssk, k to 2 bef marker, k2tog, slip marker, k to end
R6 (WS, normal row): sl1, k to marker, slip marker, p to marker, slip marker, k to end.
R7 (RS, normal row): sl1, k to end
R8 (WS, decrease row):  sl1, k to marker, slip marker, p2tog, p to 2 bef marker, p2togtbl, slip marker, k to end
R9 (RS, normal row): sl1, k to end
R10 (WS, normal row): sl1, k to marker, slip marker, p to marker, slip marker, k to end.
R11 (RS, decrease row): sl1, k to marker, slip marker, ssk, k to 2 bef marker, k2tog, slip marker, k to end
R12 (WS, normal row): sl1, k to marker, slip marker, p to marker, slip marker, k to end.
R13 (RS, decrease row): sl1, k to marker, slip marker, ssk, k to 2 bef marker, k2tog, slip marker, k to end
R14 (WS, normal row): sl1, k to marker, slip marker, p to marker, slip marker, k to end.
R15 (RS, decrease row): sl1, k to marker, slip marker, ssk, k to 2 bef marker, k2tog, slip marker, k to end
R16 (WS. decrease row): sl1, k to marker, slip marker, p2tog, p to 2 bef marker, p2togtbl, slip marker, k to end
R17 (RS, decrease row): sl1, k to marker, slip marker, ssk, k to 2 bef marker, k2tog, slip marker, k to end
R18 (WS. decrease row): sl1, k to marker, slip marker, p2tog, p to 2 bef marker, p2togtbl, slip marker, k to end

Part 4b: Heel flap (worked in rows)

Now only one of the upper parts (in garter stitch) is worked, the stitches between the markers will be decreased row-by-row and the second garter stitch bit will not be worked until the kitchener stitch in the end.

Row 1: sl1, k to marker, ssk, turn, sl1, k to end
(Illustration photo 3 shows how the piece looks just before an ssk)
Repeat row 1 until there are only two stitches between the two markers

Then knit the following (last) row: sl1, k to 1 sts before marker, do a double central decrease

Illustration photo 4 shows how the piece should look just before the last row.

Now there should be the same number of stitches on both needles.
Graft in garter stitch.

Weave in ends.
Make two.

This blogpost was featured on Oombawkadesign Crochet's 144th Link and Share Wednesday. and at the New Tuesday PINspiration Link Party. Thank you!

Why take the easy way ...

… if there's a more complicated option on offer?

Sometimes I think that I am really too complicated. This time, I wanted to knit a pair of toe-up slippers - starting in stockinette and then changing to garter stitch on top but with stockinette on the soles. It looked great … but I hadn't foreseen that when switching from knitting in the round to knitting flat in garter stitch I would (at one of garter stitch parts) have to purl …

Another option would have been to just ignore the problem and do knitting rows - which would have resulted in a slight irregularity in the texture. But I didn't want that …

So I managed to have to knit garter stitch by doing purl rows only … I have to admit that I find this a bit tedious, even though I don't actually hate to purl like others seem to do.

Anyway, I do like the construction in general and I will finish this pair - even if it is rather a complicated way to get a garter stitch edging.
                                                   
Afterwards, I guess I will knit the same (sort of) slippers again - but this time without the problem of changing from knitting in the round and knitting flat in garter stitch.

Osterspaziergang Socks

After some stressful months, I needed something hopeful ... That's why I decided to knit a pair of socks in fresh colors. Socks that look like spring is in the air. With a yarn in pastel colors and discreet and easy-to-knit lace pattern. The socks are knitted top-down with an afterthought heel.

This work by Knitting and so on is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.



Tweet

The name "Osterspaziergang" (Easter walk) comes from a famous part of Faust (Part I). It starts like this:

Vom Eise befreit sind Strom und Bäche

Durch des Frühlings holden, belebenden Blick;

Im Tale grünet Hoffnungsglück;

... 

An english translation can be found here (scene II, rows 903ff.).


Materials

• about 50 grams of fingering weight yarn (or more, depending on your foot size)
• 2.5 mm dpns
• scrap yarn (for the afterthought heel)
• a tapestry needle to weave in ends

Gauge
12 sts to 4 cm, 16 rows to 4 cm

Special Techniques and Other Useful Information

• Afterthought heel: A great overview how to do an afterthought heel can be found here at dummies.com. Knit Purl Hunter has a series of three YouTube videos where the steps to knit an afterthought heel are shown.
  - placing the scrap yarn
  - removing the scrap yarn
  - knitting the heel.
• Kitchener Stitch: i.e. grafting two life rows of stitches as for example shown in this YouTube video by Purl Soho.
• Sock Knitting Table: There are already a number of tables available on the web that tells you how many stitches to cast on for socks of any foot size, e.g. here by Schachenmayr (see table on page 3), here by Regia or here at aboutneedlework. For this pattern you need the number of stitches to cast on for your socks. 
• Loose Cast-On: If I knit top-down socks (or something else that needs a loose CO), I always do a longtail CO, but on two needles.

Instructions

Use a stitch number that is a multiple of 4 (e.g. 56, 60 or 64).

Loosely CO the number of stitches advised by the sock knitting table and join in round.
I CO 60 stitches and  distributed the stitches on 3 needles.

Cuff
Knit 12 rows of ribbing: * k2 p2 repeat from * to end of round

Knit 6 repeats of the following pattern
Round 1: k all
Round 2: * k2tog yo k2 repeat from * to end of round
Round 3: k all
Round 4: k all
Round 5: * yo ssk k2 repeat from * to end of round
Round 6: k all
You can do more repeats if you want a longer cuff.

Foot
Knit half the stitches on your needles (for me these were 30 stitches) with scrap yarn, place marker, and slip these 30 stitches back to beginning of row.

Then knit repeats of the following 6 rows until the foot is as long a the desired total foot length minus 10 cm (toe and heel).

Round 1: k all
Round 2: k to marker; k2, * k2tog yo k2 repeat from * to end of round
Round 3: k all
Round 4: k all
Round 5: k to marker; k2, * yo ssk k2 repeat from * to end of round
Round 6: k all

Toe
My usual formula for toes is:

• once: 1 decrease row, 3 normal rows (k all stitches)
• twice: 1 decrease row, 2 normal rows
• three times: 1 decrease row, 1 normal row
• and then decrease rows only ... until there are only 24 sts in total, then graft in stockinette

This means
Round 1: k all
Round 2 (decrease row): * k1, ssk, to 3 bef marker, k2tog, k1 repeat from * to end of round
Round 3: k all
Round 4: k all
Round 5: k all
Round 6 = Row 2
Round 7: k all
Round 8: k all
Round 9 = Row 2
Round 10: k all
Round 11: k all
Round 12 = Row 2
Round 13: k all
Round 14 = Row 2
Round 15: k all
Round 16 = Row 2
Round 17: k all
Round 18 = Row 2

Repeat round 18 until there are only 24 sts on your needles

Graft in stockinette stitch.

Heel
Pick up the stitches of the rows directly below and above the scrap yarn. Then remove the scrap yarn.
In the first round pick up 2 or 3 stitches from the gap, i.e. between the upper and lower row.

Then I knitted the heel with the following formula

• alternate 1 decrease row with 1 normal row (k all stitches)
• ... until there are only 24 sts in total, then graft in stockinette

Or spelled out

Round 1: k all
Round 2 (decrease row): * k1, ssk, to 3 bef marker, k2tog, k1 repeat from * to end of round
Repeat rounds 1 to 2 until there are only 24 stitches left on your needles. Graft in stockinette stitch.

Weave in ends. Make two.

Stack Overflow Cowl

Stacked stitches are a wonderful way to achieve lovely and intriguing color patterns. This cowl is knitted flat - started with a provsional cast on and ended by grafting. It may take a while to get the hang of knitting stacked stitches but it's definitely a worthwhile activity - since the finished piece is not your average garter stitch cowl.

The first pattern with stacked stitches I saw was Xandy Peters' Fox Paws Pattern - absolutely stunning! Another one of hers is called Ribbon Candy and available on knitty.com. In this pattern I'm going to use a similar notation to hers for the stacked stitches.

As to the pattern name - a stack overflow is a computing term. It means that an execution stack (a part of the computer's memory) grows beyond the memory that is reserved for it - which can lead to computer security vulnerabilities. For more details see this Wikipedia article.

This work by Knitting and so on is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.



Tweet


Materials

• about 150 grams of fingering weight yarn in two colors
• 3.25mm needles (straight or circulars)
• a tapestry needle to weave in ends

Special Stitches and Techniques

• kyok = k1, yo, k1 into the same stitch
• SB = slip back the number of sts to the left hand needle
• inc1-9 = [kyok, SB2] 3 times, kyok, k3
  This is called stacked increase. A YouTube video that shows how to make stacked increases can be found on So, I make stuff's YouTube channel
• dec9-1 = k3, s1, k2tog, psso, SB1, k2tog, pass next st over, SB1 2 times, k2tog, pass next st over. This is called stacked decrease. Also from So, I make stuff's YouTube channel here's a video that shows how to do stacked decreases.
• BBO = backwards bind off: insert the left hand needle into the last 2 sts and knit together, alternatively you can turn your work: do a p2tog and slip the last st back on the left hand needle
• Provisional CO: My favorite method for a provision CO is the crochet provisional CO - it is shown in this Youtube video by New Stitch a Day.
• Grafting Garter Stitch: Shown in this YouTube video by New Stitch a Day. If you want to know all about grafting, please read the brilliant "Grafting Myths" series on Joni Coniglio's blog on knittingdaily.com.
• Carrying yarn up:  If you want to avoid cutting your yarn with every color change (and subsequently to have to weave in too many ends), you will carry up the yarn on the side of your work - this technique is shown in this YouTube video by Knit Purl Hunter.

Size

I did a cast-on of 51 stitches and total of 38 pattern repeast (38 times the 6 rows). My scarf has a width of 29 cm and a circumference of 150 cm.

Instructions

Provisionally CO51 (or if you'd like to vary the width, cast on a multiple of 4 plus 3 (4n+3))
Row 1 (WS): k all
Row 2 (RS):  k1 * inc1-9, k3 repeat from * until there are only two stitches stitch left, inc1-9, k1
Row 3 (WS): * k2tog k2 kfb k1 kfb k2 ssk k1 repeat from * until there are only 11 sts left, k2tog k2 kfb k1 kfb k2 ssk
Change color
Row 4 (RS) = Row 3
Row 5 (WS) = Row 3
Row 6 (RS): BO4 (and carry up yarn from other color), k2, * dec9-1, k3 repeat from * until there are only 4 sts left, BBO4

Repeat rows 1 to 6 and change color everytime you get to row 4, i.e. you knit 6 rows with each color (rows 4 to 6 and 1 to 3).

Repeat until your cowl has reached the desired lenght - make sure to end with the color you started with. Leave a tail of about 1 meter for grafting. Place the stitches from the provisional CO on the second needle, hold the ends together (RS out) and graft in garter stitch.

Weave in ends an block.

This page was featured as "Most Clicked" at Pinbellish Link Party #28 and at the Kntting Love Link Party in May 2016.