Green Summer Top

I am always proud to finish tops or sweaters. I mostly knit accessories (scarfs, fingerless gloves) that don't need swatching, you just start and it will work because sizing is not an issue. But a bigger project - where size actually matters - is something special for me.
So I was quite pleased when I finished this nice summer top in green cotton. I bought the yarn about three years ago and had already made two other attempts to knit a top with it - but it just didn't work the way I planned (you can see photos of my failed attempts on the Ravelry project page).

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.



When I restarted this in April, I settled for a simple top-down raglan construction - with seed stitch on arms and shoulders, stockinette stitch on front and back, and seed stitch instead of a ribbing. I am quite pleased with it and I like how the seed stitch feels.

Here's a rough description of what I did:

• First of all, I knitted a swatch (yes, for sweaters this is a useful step, even though I don't like swatching) and calculating the stitches to start with and the increases (if you don't want to calculate yourself, there are raglan calculators available on the internet, e.g. one by knittingfool.com or one by From TheHartle).
• Since I wanted visible raglan increases I distributed the stitches for the back of the neckline and the arms in a way, that I would reach the arm circumference and the planned width of the back or front at the same time. (Example: I wanted an arm circumference of 40 cm and 50 cm as width of the back or front part. So when I started, the neck part of my raglan part was 10 cm wider than either of the arm parts.)
• So I distributed my CO into 5 parts: left front (very small), left arm, back, right arm, right front - and started knitting flat (RS and WS).
• For the raglan increases I simply did yarn-overs.
• The V-neck shape was created by a simple kfb/kbf at the beginning/end of each RS row. 
• Once the stitch count on the two front bits added up to be as high as the stitch count of the back piece, I joined it at the front and started knitting in the round.
• I started with seed stitch on the arms and on the back. After seperating the arm stitches, I continued in the round in stockinette stitch (also on the back).  
• This is a boxy top. so I didn't do any shaping around the waist and hips (as opposed to other summer tops I've knitted, e.g. this one). 
• I finished the lower hem in seed stitch again, first in the round - and then I separated the piece into front and back.
• The arms were finished in seed stitch in the round, too.

Looking forward to wearing this in summer.

Lying flat - the pattern for the little knitted hearts is available here.

A Different Kind of Openwork - E-Book

An interesting knitting pattern can consist of added features, but also of features that are missing. For the scarfs of this e-book, I took the second route. The scarfs feature square holes to decorate the knitted fabric. These holes are knitted without cutting your yarn, i.e. you get the effect without having to weave in a multitude of yarn ends. 

I've already published two knitting patterns using this technique (Negative Spaces Scarf  and Escalera Scarf) and have even held a class about it - using the patterns and additional materials explaining the general idea. So I thought it might be a interesting to create an e-book with all this material. And here it is.

This e-book is available for purchase on Ravelry here.

It is also available via Gumroad:
Buy my product

Once you get the hang of the technique, these scarfs make good TV-knitting - the main part of each is done in plain garter stitch. Besides garter stitch you need to know how to do a backwards loop CO and how to knit a k2togtbl.

This e-book includes

• a description of the technique to knit square holes without cutting yarn - together with a pattern for a small swatch with 6x6-sized holes and an explanation how to knit holes of a different size
• two patterns using this technique: 
• Negative Spaces Scarf - a plain rectangular scarf decorated with square holes at the edges and 
• Escalera Scarf - a triangular(-ish) scarf knitted sideways with steps and square holes at the lower edge

Sømløs top - No Assembly Required Top in Danish

Marianne Holmen from strikkeglad.dk has written another Danish translation for one of my patterns - this time for my Not Assembly Required Knitted Top. Mange Tak!

The Danish translation can be found here.
The original (english) version of this pattern is available here.

A list of other translated versions of my patterns can be found in this blogpost.


This work by Knitting and so on is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Yet Another Heart-Shaped Potholder

In my part of the world, Mother's Day is celebrated on the 2nd Sunday in May. So here's a pattern for cute heart shaped potholders to accompany the cake you bake for your mum.
It's knitted in one  piece, which minimizes the number of ends you have to weave in - and all in garter stitch. They come in two sizes - a larger and a smaller one.
If you've never done short rows, this might be the project to learn it, because it's quickly done <3

This work by Knitting and so on is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.






Materials

• between 20 or 30 grams of DK weight 
• 3mm knitting needles
• a tapestry needle to weave in ends

Techniques

• Short rows with wrap and turn (w+t) - as shown in this YouTube video by Very Pink Knits.
• Knitted Cast-On: See this Youtube-video by Very Pink Knits.

Sizes
The bigger heart measures 19 cm at its widest point - the small one 15 cm.


Instructions

Big Heart

CO21
Row 0 (setup row): sl1, k to end, do a knitted CO of 2 sts
Ridge 1: kfb, k1, ktbl, k up to last st, w+t, k up to last st, kfb
Ridge 2: kfb, k to 2 bef end, w+t, k up to last st, kfb
Ridge 3: kfb, k to 3 bef end, w+t, k up to last st, kfb
Ridge 4: kfb, k to 4 bef end, w+t, k up to last st, kfb
Ridge 5: kfb, k to 5 bef end, w+t, k to end
Ridge 6: kbf, k20, w+t, k to end
Ridge 7: kfb, k to 6 bef end, w+t, k to end
Ridge 8: kfb, k to 7 bef end, w+t, k to end
Ridge 9: kfb, k to 8 bef end, w+t, k to end
Ridge 10: k to 9 bef end, w+t, k to end
Ridge 11: k 20, w+t, k to end
Ridge 12: k to 10 bef end, w+t, k to end
Ridge 13: k to 11 bef end, w+t, k to end
Ridge 14: k to 12 bef end, w+t, k to end
Ridge 15: k to 13 bef end, w+t, k to last 2 sts, ssk
Ridge 16: k 15, w+t, k to last 2 sts, ssk
Ridge 17: k to 14 bef end, w+t, k to last 2 sts, ssk
Ridge 18: k to 15 bef end, w+t, k to last 2 sts, ssk
Ridge 19: k to 16 bef end, w+t, k to last 2 sts, ssk
Ridge 20: k2tog, k to 17 bef end, w+t, k to last 2 sts, ssk
Rigde 21: k2tog, k to 18 bef end, w+t, k to last 2 sts, ssk
Rigde 22: k2tog, k to 19 bef end, w+t, k to last 2 sts, ssk
Rigde 23: k2tog, k to 20 bef end, w+t, k to last 2 sts, ssk
Ridge 24: k2tog, w+t, kfb

Ridge 25: kfb, k to 20 bef end, w+t, k up to last st, kfb
Ridge 26: kfb, k to 19 bef end, w+t, k up to last st, kfb
Ridge 27: kfb, k to 18 bef end, w+t, k up to last st, kfb
Ridge 28: kfb, k to 17 bef end, w+t, k up to last st, kfb
Ridge 29: kfb, k to 16 bef end, w+t, k to end
Ridge 30: kfb, k to 15 bef end, w+t, k to end
Ridge 31: kfb, k to 14 bef end, w+t, k to end
Ridge 32: kfb, k15, w+t, k to end
Ridge 33: kfb, k to 13 bef end, w+t, k to end

Ridge 34: k to 12 bef end, w+t, k to end

Ridge 35: k to 11 bef end, w+t, k to end

Ridge 36: k to 10 bef end, w+t, k to end

Ridge 37: k20, w+t, k to end

Ridge 38: k to 9 bef end, w+t, k to end

Ridge 39: k to 8 bef end, w+t, k to last 2 sts, ssk

Ridge 40: k to 7 bef end, w+t, k to last 2 sts, ssk

Ridge 41: k to 6 bef end, w+t, k to last 2 sts, ssk

Ridge 42: k20, w+t, k to last 2 sts, ssk

Ridge 43: k to 5 bef end, w+t, k to last 2 sts, ssk

Ridge 44: k2tog, k to 4 bef end, w+t, k to last 2 sts, ssk

Ridge 45: k2tog, k to 3 bef end, w+t, k to last 2 sts, ssk

Ridge 46: k2tog, k to 2 bef end, w+t, k to last 2 sts, ssk

Ridge 47: k2tog, k to 1 bef end, w+t, k to last 2 sts, ssk

Ridge 48: BO2, k2tog, k to last st, w+t, k to last 2 sts, ssk

Row 49: k2tog, BO to end

Cut yarn and weave in ends.

Small Heart

CO16
Row 0 (setup row): sl1, k to end, do a knitted CO of 2 sts
Ridge 1: kfb, k1, ktbl, k up to last st, w+t, k up to last st, kfb
Ridge 2: kfb, k to 2 bef end, w+t, k up to last st, kfb
Ridge 3: kfb, k to 3 bef end, w+t, k up to last st, kfb
Ridge 4: kfb, k to 4 bef end, w+t, k to end
Ridge 5: kfb, k12, w+t, k to end
Ridge 6: kfb, k to 5 bef end, w+t, k to end
Ridge 7: kfb, k to 6 bef end, w+t, k to end
Ridge 8: kfb, k to 7 bef end, w+t, k to end
Ridge 9: k to 8 bef end, w+t, k to end
Ridge 10: k12, w+t, k to end

Ridge 11: k to 9 bef end, w+t, k to end

Ridge 12: k to 10 bef end, w+t, k to end

Ridge 13: k to 11 bef end, w+t, k to last 2 sts, ssk

Ridge 14: k12, w+t, k to last 2 sts, ssk
Ridge 15: k to 12 bef end, w+t, k to last 2 sts, ssk

Ridge 16: k2tog, k to 13 bef end, w+t, k to last 2 sts, ssk

Ridge 17: k2tog, k to 14 bef end, w+t, k to last 2 sts, ssk

Ridge 18: k2tog, k to 15 bef end, w+t, k to last 2 sts, ssk

Ridge 19: k2tog, w+t, kfb

Ridge 20: kfb, k to 15 bef end, w+t, k to last st, kfb

Ridge 21: kfb, k to 14 bef end, w+t, k to last st, kfb

Ridge 22: kfb, k to 13 bef end, w+t, k to last st, kfb

Ridge 23: kfb, k to 12 bef end, w+t, k to end

Ridge 24: kfb, k11, w+t, k to end

Ridge 25: kfb, k to 11 bef end, w+t, k to end

Ridge 26: kfb, k to 10 bef end, w+t, k to end

Ridge 27: k to 9 bef end, w+t, k to end

Ridge 28: k12, w+t, k to end

Ridge 29: k to 8 bef end, w+t, k to end

Ridge 30: k to 7 bef end, w+t, k to end

Ridge 31: k to 6 bef end, w+t, k to 2 bef end, ssk

Ridge 32: k to 5 bef end, w+t, k to 2 bef end, ssk

Ridge 33: k12, w+t, k to 2 bef end, ssk

Ridge 34: k to 4 bef end, w+t, k to 2 bef end, ssk

Ridge 35: k2tog, k to 3 bef end, w+t, k to 2 bef end, ssk

Ridge 36: k2tog, k to 2 bef end, w+t, k to 2 bef end, ssk

Ridge 37: k2tog, k10, w+t, k to 2 bef end, ssk

Ridge 38: k2tog, k to last st, w+t, k to last 2 sts, ssk

Row 39: k2tog, BO to end

Cut yarn and weave in ends.

Domspitzen

If there's one knitting skill I don't have, it's fair isle color work. From time to time I try it again - only to find, that I'm not much good at it. Yes, I know, that doing it more would make me better at it, but until I've done it a lot, I stick to smaller fair isle projects. Like this phone sock here.
Since I think that it's a lovely piece to try out fair isle, here's a short how-to. It's NOT a line-by-line pattern, but there is a complete chart :)

I chose the name "Domspitzen", because somebody on Instragram suggested that the peaks reminded them of the silhouette of the towers of the Cologne Cathedral - and I rather agree.



This work by Knitting and so on is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.




Materials

• about 15 grams of fingering weight yarn in two colors; main color (MC, red in the pictures) and contrast color (CC, off-white in the pictures)
• 3 mm knitting needles, you can use dpns, circulars with magic loop or Addi CrasyTrios
• a tapestry needle to weave in ends

Gauge and Size
17 rows gave 5 cm in height, and 17 stitches 5 cm in width.
The finished piece measures about 15.5 cm in height and 15 cm in circumference.


Techniques

• Judy's Magic Cast-On is a technique that gives you live stitches on both sides of your needle - it is generally used for toe-up socks (e.g. in this pattern), but it can be used for other purposes as well. Here's a written description (from Knitty) and here's a YouTube-video by Cat Bordhi and another YouTube-video by Very Pink Knits.

Instructions

Do a magic CO of 2x24 stitches, i.e. you have a total of 48 stitches with MC.
Knit one row in stockinette (in the round) in MC.

Then knit the charted pattern in the round according to the chart, with 48 stitches you will have 8 repeats of the stitch pattern.

After you've finished row 40 of the stitch pattern add 4 rows in stockinette in MC.
Finish with 8 rows of k2p2-ribbing in MC.

Bind off in ribbing pattern.

Weave in ends and block.

Bärentatzen Scarf

Ever since I knitted a brioche-lace combination for my Mum (see Luftbläschen Scarf) I wanted to do another project that incorporated both techniques.
So, here’s another scarf that combines the fluffiness of brioche with the elegance of lace - and because it’s brioche, it’s reversible. Once you get the hang of it, its fun to do - and I really like the result .

As to the name, the stitch pattern reminded me of certain piped chocolate biscuits that are tradional here, called Bärentatzen (which literally translates to bear claws, but American bear claws are a different bakery item). The photo at the end of this post shows Bärentatzen.

The pattern is available as a PDF

• on Ravelry, 
• on Loveknitting, 
• on Payhip and 
• on Gumroad.

It is 10 pages long and contains:

• the complete written patterns to knit this scarf
• a chart of the pattern repeats
• photo tutorials for the following stitches /stitch combinations
• brk4stdec: a double centred decrease in brioch
• brk2stLdec: a left-leaning decrease in brioche
• brk2stRdec: a right-leaning decrease in brioche
• sl1yo, yo, brk: i.e. a yarn-over between two stitches when knitting brioche
• kp1, i.e. knitting two stitches of the sl1yo, yo into the yarn-over of the row below
• yo, sl1yo, brk: also a yarn-over between two stitches in brioche, but in a different sequence to make the pattern look symmetrical on the other side
• pk1, i.e. knitting two stitches of the yo, sl1yo into the yarn-over of the row below

Skills you need to finish this scarf

• knitting brioche (in one color)
• a certain stamina while knitting - this is knitted in lace weight yarn and brioche, i.e. it grows extremely slow

Materials

• about 250 to 300 grams of Lace weight yarn (I used Wollmeise lace, colorway Hamam)
• 3.25 mm knitting needles
• 1 removable stitch marker (or a bobby pin) to do the 4st brioche decrease
• a tapestry needle to weave in ends

Cupcake Hat

I had the idea for this wavy hat for quite a long time - but it took me a while to actually do it (and I honestly don't know why :), and in my head I had the color distribution planned differently. But I am quite pleased with the result now.
I knitted this hat with leftover yarn (nearly one ball of each color) from a cowl (BFF Cowl designed by Ysolda Teague & tiny owl knits that I knitted back in 2012, a gorgeous Knitty.com pattern) and a pair of fingerless gloves (a DK version of my Short Wave Mitts). In the end, it was a game of yarn chicken, but fortunately I won :) (I would have frogged it and started it again with a shorter rim otherwise ...)

This hat is knitted sideways  with a chevron pattern and short rows. Starting with a provisional CO and ending with grafting gives it a seamless look.
The pattern is given in one size only, but there are explanations on how to adapt it to other sizes.

This work by Knitting and so on is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.






Materials

• 100 grams of DK weight yarn in two colors - 50 grams of each color
• 4mm knitting needles
• scrap yarn for provisional CO
• tapestry needle for grafting and weaving in end

Techniques

• Provisional CO: My favorite method for a provision CO is the crochet provisional CO - it is shown in this Youtube video by New Stitch a Day.
• Short rows with wrap and turn (w+t) - as shown in this YouTube video by Very Pink Knits. 
• Grafting in stockinette stitch (also called Kitchener Stitch): a way to seamlessly join two rows of live stitches - as shown in this YouTube video by WEBS America's Yarn Store.

Size and Gauge
The hat measures 23 cm from rim to crown and about 49 cm in circumference (unstretched).
For me, 8 ridges (16 rows) in garter stitch gave 5 cm in height and 11 sts in garter stitch gave 5 cm in width.


How to Adapts to Other Sizes
Height: The rows consist of a rim and (for the waves) of short parts A and B (with A = "kfb, k3, ssk" and B = "k2tog, k3, kfb"). So to adapt the height you can either make the rim bigger or smaller - by casting on more or fewer stitches. Or you can do more waves, by adapting the number of A and B parts. But you have to make sure, that you use A and B alternately.
Circumference: At the rim, there are 160 rows - or 80 ridges (9 in garter stitch and 1 in stockinette per section).
Using your gauge, calculate the number of ridges you need and round to the next value that is divisible by 8. The number you get is the number of ridges per section. So you need to adapt the number of ridges as given in the pattern. Knitting fewer ridges means not knitting the last row(s) of a section (according to your calculations). Knitting more ridges means making the following ridges shorter by 2 stitches per ridge.

Instructions

The pattern is a repeat of chevrons - and these chevrons consist of two parts - one that starts with an increase and ends with a decrease (A) and one the other way round (B).
Therefore, the following abbreviations will be used.
A = kfb, k3, ssk
B = k2tog, k3, kfb

Rows are started on WS – that way you change yarns at the crown of the hat (very close to on another), so you don‘t have to carry your (currently) unused yarn up or cut your yarns.

Section 1 (in C1):
pCO60 – and leave a tail long enough for grafting (about 1 meter)
R1 (setup row, RS): k12, pm, k6, pm, k6, pm, k6, pm, k6, pm, k6, pm, k6, pm, k6, pm, k6
Ri2: (WS) k all, turn, (RS) sl1, k11, sm, [A, sm, B, sm]x3, A, sm, k4, w+t
Ri3: (WS) k all, turn, (RS) sl1, k11, sm, [A, sm, B, sm]x3, A, sm, k2, w+t
Ri4: (WS) k all, turn, (RS) sl1, k11, sm, [A, sm, B, sm]x3, A, sm, w+t
Ri5: (WS) k all, turn, (RS) sl1, k11, sm, [A, sm, B, sm]x3, k4, w+t
Ri6: (WS) k all, turn, (RS) sl1, k11, sm, [A, sm, B, sm]x3, k2, w+t
Ri7: (WS) k all, turn, (RS) sl1, k11, sm, [A, sm, B, sm]x3, w+t
Ri8: (WS) k all, turn, (RS) sl1, k11, sm, [A, sm, B, sm]x2, A, sm, k4, w+t
Ri9: (WS) k to 12 bef end, w+t, (RS) [A, sm, B, sm]x2, A, sm, k2, w+t
Ri10: (WS) k all, turn, (RS) sl1, k11, sm, [A, sm, B, sm]x2, A, sm, w+t
Ri11: (WS) k all, turn, (RS) sl1, k11, sm, [A, sm, B, sm]x3, A, sm, B

Section 2 (in C2):
Ri12: (WS) sl1, p to last st, k1, turn, (RS) sl1, k11, sm, [A, sm, B, sm]x3, A, sm, k4, w+t
Ri13: (WS) k all, turn, (RS) sl1, k11, sm, [A, sm, B, sm]x3, A, sm, k2, w+t
Ri14: (WS) k all, turn, (RS) sl1, k11, sm, [A, sm, B, sm]x3, A, sm, w+t
Ri15: (WS) k all, turn, (RS) sl1, k11, sm, [A, sm, B, sm]x3, k4, w+t
Ri16: (WS) k all, turn, (RS) sl1, k11, sm, [A, sm, B, sm]x3, k2, w+t
Ri17: (WS) k all, turn, (RS) sl1, k11, sm, [A, sm, B, sm]x3, w+t
Ri18: (WS) k all, turn, (RS) sl1, k11, sm, [A, sm, B, sm]x2, A, sm, k4, w+t
Ri19: (WS) k to 12 bef end, w+t, (RS) [A, sm, B, sm]x2, A, sm, k2, w+t
Ri20: (WS) k all, turn, (RS) sl1, k11, sm, [A, sm, B, sm]x2, A, sm, w+t
Ri21: (WS) k all, turn, (RS) sl1, k11, sm, [A, sm, B, sm]x2, k4, w+t
Ri22: (WS) k all, turn, (RS) sl1, k11, sm, [A, sm, B, sm]x3, A, sm, B

Repeat ridges 12 to 22 6 more times in alternating colors.
Now you have  a total of 8 sections, i.e. 4 sections of each color

Put the stitches from your provisional cast-on on a needle, hold both needles right sides together, holding the needle with the last knitted row (in C2) in front - see picture on the right.

Use the yarn tail (in C1) to graft together in stockinette stitch.

Weave in ends.