These mitts are crocheted flat and each in one piece. They are started at the thumb, which is worked flat and joined into a tube. Afterwards, the main part starts with an additional chain, and then is worked back and forth around the thumb. Working through the back loop only gives them an interesting texture.
As to the name, the finished pieces reminded me of creamy, wavy layers of a rich chocolate cake.
![Creative Commons License](https://i.creativecommons.org/l/by-nc-sa/4.0/80x15.png)
This work by Knitting and so on is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
![](https://api.ravelry.com/badges/projects?p=la-chocolatiere-mitts&t=.gif)
Materials
- a total of about 40 to 45 grams of fingering weight yarn in two colors (called C1 and C2) - I used beige and dark (chocolate) brown
- 3mm crochet hook
- 2 removable stitch markers (e.g. safety pins)
- tapestry needle to weave in ends
Size
The finished mitts - as knitted by me - are about 19 cm long. The width is adjustable - in part 3 of the pattern.
Stitches and Abbreviations
- ch: chain
- sc: single crochet (American notation)
- sctbl: single crochet through back loop: http://crochet.about.com/od/crochetterms/tp/back-loops-only-or-blo.htm
- sl st: slip stitch: http://www.dummies.com/how-to/content/how-to-crochet-the-slip-stitch.html
- inc: increase by working 2 single crochet stitches into 1 sc below (in case of this pattern, it's 2 sctbl into the sctbl below): http://www.dummies.com/how-to/content/how-to-increase-with-single-crochet.html
- dec or sctog: decrease by working 2 single crochet stitches together: http://www.dummies.com/how-to/content/how-to-decrease-single-crochet.html
- join or connect: joining pieces with crochet: in order to join to pieces (or, in case of this pattern, the two sides of one piece) hold the pieces together with wrong sides on the outside and insert the crochet hook into both pieces at the same time, a foto tutorial can be found here (scroll down to “Joining with Crochet” http://knitty.com/ISSUEwinter08/FEATwin08TT.php)
- [y]*x: repeat the sequence y (within the square brackets) x times
- [y] to x sts before marker: repeat the sequence y until there are x stitches before you reach the marker
- In the pattern, there will also be abbreviations for the wave sequences in parts 2 and 3, namely:
- A = inc, sctbl3, dec, dec, sctbl3, inc
- B = dec, sctbl3, inc, inc, sctbl3, dec
General Construction
- Part 1 is the thumb - worked flat and ends with joining the sides to get a little tube.
- Part 2 starts with a chain of 36 sts and is worked flat (back and forth) around the thumb - the rows consist of the wave sequences (at the beginning and end of a row) and the increases in round sequences (in the middle of the row, around the thumb). The increases around the thumb are calculated to form a part of a flat circle. (The general idea how to crochet a flat circle is explained in this blogpost, i.e. the Kreisel Mitts crochet pattern).
- Part 3 is also worked flat, it widens the mitt to fit your hands and ends by crocheting the edges together.
Instructions
NOTE 1: all increase and decrease stitches in this part are crocheted through the back loop of the underlying stitch only.
NOTE 2: Please note that the sequences in brackets don't always match the number of stitches left (e.g. it might say [dec, sctbl 5], but there are only 4 stitches left) - that's OK. Just continue with the sequence until the condition is met and then stop (in case of the example above, just make one decrease and sctbl the 3 stitches to the end)
NOTE 3: Whenever you encounter a marker, work that stitch and replace the marker up to the current row - unless indicated otherwise.
First mitt
Part 1 (Thumb)
With C1
Row 0: ch 10 and 1 turning-chain
Row 1: sc 10; 1 turning-chain
Row 2: sctbl 10; 1 turning-chain
Row 3: sctbl 8, dec; 1 turning-chain
Row 4: sctbl 9; 1 turning-chain
Row 5: sctbl 7, dec; 1 turning-chain
Row 6: sctbl 8; 1 turning-chain
Row 7: sctbl 6, dec; 1 turning-chain
(Your piece should now be as high as half of your thumb circumference. If it's too small for that you can add an even number of "sctbl all, 1 turning-chain"-rounds.)
Row 8: sctbl 7; 1 turning-chain
Row 9: sctbl 6, inc; 1 turning-chain
Row 10: sctbl 8; 1 turning-chain
Row 11: sctbl 7, inc; 1 turning-chain
Row 12: stbl 9; 1 turning-chain
Row 13: sctbl 8, inc; 1 turning-chain
Row 14: sctbl 10; 1 turning-chain
Now your piece should look like in illustration 1.
Fold the edges together (chain edge and your last row) and connect.
![]() |
Illustrations |
Part 2
Row 0 (C1): chain 36 + 1 turning chain - now your piece looks similar to illustration 2
Row 1 (WS, C1): [A]*3, place marker, sc around the rim of the thumb (from the inside, I picked up 24 sts, if you added a few rows between row 7 and 8 of part 1, you will have a different stitch count), place marker [B]*3
Row 2 (RS, C2): [B]*3, dec, [sctbl2, inc] to 2 before marker, dec, [A]*3
Row 3 (WS, C2): [A]*3, sctbl1, dec [sctbl1, inc, sctbl2] to 3 bef marker, sctbl1, dec, [B]*3
Row 4 (RS, C1): [B]*3, dec, sctbl2, [sctbl2, inc, sctbl2] to 4 bef marker sctbl2, dec , [A]*3
Row 5 (WS, C1): [A]*3, dec, sctbl3, [sctbl3, inc, sctbl2] to 5 bef marker, sctbl3, dec , [B]*3
(Now your piece should look similar to illustration 3.)
Row 6 (RS, C2): [B]*3, dec, sctbl3, inc, [sctbl1, inc, sctbl5] to 6 bef marker, dec, sctbl3, inc, [A]*3
Row 7 (WS, C2): [A]*3, inc, sctbl3, dec, sctbl1, [sctbl1, inc, sctbl6] to 7 bef marker sctbl1, inc, sctbl3, dec, [B]*3
Row 8 (RS, C1): [B]*3, dec, sctbl3, inc, [sctbl4, inc, sctbl4] to 6 bef marker, dec, sctbl3, inc, [A]*3
Row 9 (WS, C1): [A]*3, inc, sctbl3, dec, [inc, sctbl9] to 6 bef marker inc, sctbl3, dec, [B]*3
Row 10 (RS, C2): [B]*4, [sctbl2, inc, sctbl8] to marker sctbl2, [A]*4
Row 11 (WS, C2): [A]*4, [sctbl4, inc, sctbl7] to marker, [B]*4
Row 12 (RS, C1): [B]*4, [sctbl8, inc, sctbl4]] to marker, [A]*4
Row 13 (WS, C1): [A]*4, [inc, sctbl13] to marker, [B]*4
Row 14 (RS, C2): [B]*4, dec, sctbl3, inc, [sctbl2, inc, sctbl1] to 6 bef marker, dec, sctbl3, inc, [A]*4
Row 15 (WS, C2): [A]*4, inc, sctbl3, dec, [sctbl2, inc, sctbl12] to 6 bef marker inc, sctbl3, dec, [B]*
Part 3
Row 1 (RS, C1): [B]*4, dec, sctbl3, inc, 1 turning chain
Row 2 (WS, C1): inc, sctbl3, dec, [B]*4, 1 turning chain
Row 3 (RS, C2): [B]*4, dec, sctbl3, inc, 1 turning chain
Row 4 (WS, C2): inc, sctbl3, dec, [B]*4, 1 turning chain
Row 5 (RS, C1): [B]*4, dec, sctbl3, inc, 1 turning chain
Row 6 (WS, C1): inc, sctbl3, dec, [B]*4, 1 turning chain
Try or measure whether the piece fits your hands. If it is not wide enough, repeat rows 3 to 6.
Your piece should look similar to illustration 4.
Hold right sides together (aligning at the lower edge) and connect both sides.
Cut yarns and weave in ends.
Second Mitt
If you want one mitt to be the mirror image of the other, you need to exchange the wave sequences, i.e. every time the pattern for mitt 1 says "A", you need to crochet sequence B and vice versa. The increases around the thumb are the same for both mitts.
I also switched the colors, i.e. whenever I used C1 for mitt 1, I used C2 for mitt 2 - and vice versa.
so Cool!
AntwortenLöschenThank you ♥
LöschenHi ! Those mitts are awesome ! I've just try to make the first one, and I have already an issue... Making the thumb, okay, but then, after the 36ch, when on the Rox 2, I go on the RS to make the waving effect, at the end the [B]*3 sequence, !i didn't have the 4sc you said to make the next sequence dec, [sctlb2, inc] then the dec. I don't understand. You said we have 2sc left, but the last sequence of [B] is near the thumb. I didn't know if I explain correclty... Please answer to me ^^
AntwortenLöschenHi, the sequences in brackets don't always match the number of stitches left (see Note 2) - e.g. it might say [sctbl2, inc] to 2 before marker, but there is only 1 stitch left till you reach the marker) - that's OK. Just continue with the sequence until the condition is met and then continue with the part after the condition.
LöschenI couldn't always give exact numbers, since the number of stitches you pick up around the thumb is flexible.
Hope this helps!
Beautiful!!
AntwortenLöschenHallöchen,
AntwortenLöschenlange hab ich mich hier nicht mehr blicken lassen. Ich bin heute endlich mal dazu gekommen, die Anleitung auszuprobieren. Dabei ist mir ein Flüchtigkeitsfehler in Part 3 aufgefallen. Die WS Reihen müssen auch [B] gehäkelt werden, sonst stimmt es nicht. Ansonsten sind die fingerlosen Handschuhe wie immer der Hammer.
Liebe Grüße
Heike
Hallo Heike,
Löschenda hast du natürlich recht und ich habe das korrigiert.
Vielen lieben Dank für den Hinweis, ich schätze das sehr ♥ ♥ ... und bitte entschuldige die superlangsame Antwort.
Liebe Grüße
SR
They are so cute! Thanks for sharing!
AntwortenLöschenThank you so much!
Löschen